JennAir dishwasher F9E1 / Drain

JennAir dishwasher
error F9E1

Dishwasher / display reference

F9E1 on a JennAir dishwasher is listed as Long Drain, meaning the water is not leaving the tub. The page's checks run from the filter to the drain hose, the sink disposer knockout plug on a new installation, the air gap and suds. Cycle the power after the checks.

Also shown as F9E1

Last reviewed

Dishwasher / display reference
Meaning
F9E1 on a JennAir dishwasher is listed as Long Drain, meaning the water is not leaving the tub. The page's checks run from the filter to the drain hose, the sink disposer knockout plug on a new installation, the air gap and suds. Cycle the power after the checks.
Who handles it
Owner checks first, then a technician
Related codes
Source
F9E1 - Dishwasher - Product Help | JennAir

What JennAir dishwasher F9E1 means.

What it means

F9E1 on a JennAir dishwasher is listed as Long Drain, meaning the water is not leaving the tub. The page's checks run from the filter to the drain hose, the sink disposer knockout plug on a new installation, the air gap and suds. Cycle the power after the checks.

What you can safely check

Take out the filter and rinse away debris.

When to call a technician

F9E1 returns after the checks and a power cycle.

Checks you have ticked / saved in this browser

Safe checks, in order.

0 of 5 checks done
  1. JennAir dishwasher F9E1: Dishwashers in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Before you begin

    Clean the filter

    Take out the filter and rinse away debris.

  2. The black glass control strip of a built-in wall oven above its stainless handle
    Illustration. Follow your model’s instructions.
    Check 2

    Check the drain hose

    The hose should not be kinked, pinched or clogged.

  3. Over the shoulder view of a person holding a tablet with a blank checklist, a refrigerator behind.
    Illustration. Follow your model’s instructions.
    Check 3

    Check the disposer and air gap

    If a sink disposer is connected, make sure it is clear and, on a new installation, that the knockout plug is gone. Look at the air gap too.

  4. A technician reading a built-in oven display
    Illustration. Follow your model’s instructions.
    Check 4

    Consider suds

    Excess suds can slow the drain.

  5. Illustration. Follow your model’s instructions.
    Check 5

    Cycle the power

    Turn off the breaker for the dishwasher, or pull its plug, for 30 seconds, then restore power.

Still showing F9E1?

Send the model and the checks you have already run, then begin your request from this page.

Book a visit

The water-out path.

Conceptual dishwasher sectionFiltersSumpDrain pumpDrain hoseSink connection12345
  1. 1Filters
  2. 2Sump
  3. 4Drain hose
  4. 5Sink connection

A simplified drawing, because layouts change with the model. Tap an outlined part to see a photo and the related check.

Parts behind the message.

Corrugated gray drain hose looped up to a cabinet bracket beside a garbage disposer under a sink.

Component reference

Dishwasher drain motor and hose

JennAir F9E1 is "Long Drain" and F9E2 is "Drain motor error".

Read the definition

A little more context.

What can I check first?

The filter, the drain hose, the disposer with its knockout plug on a new installation, the air gap and excess suds.

Read the supporting manual

The manual behind the message.

Manufacturer document

F9E1 - Dishwasher - Product Help | JennAir

JennAir Product Help (producthelp.jennair.com)

dateModified 2026-06-15; PH 12203 / PH 12203 (dishwasher)

Manufacturer document

F9E1- Dishwasher - Product Help | JennAir

JennAir Product Help (producthelp.jennair.com)

dateModified 2025-05-27; PH 12202 / PH 12202 (dishwasher)

Manufacturer document

9 Pause 1 Pause - pause, repeat - Error Code - Dishwasher - Product Help | JennAir

JennAir Product Help (producthelp.jennair.com)

dateModified 2026-06-15; PH 12181 / PH 12181 (dishwasher)

Manufacturer document

Dishwasher Error Codes - Reading - Product Help | JennAir

JennAir Product Help (producthelp.jennair.com)

dateModified 2026-08-31; PH 14220 / PH 14220 (dishwasher)

Scope: JennAir dishwashers (PH 12203, with a shorter twin on PH 12202 and the flash page PH 12181).

Here to help

Good questions.
Clear answers.

Talk to our team
What is the meaning of F9E1 on a JennAir dishwasher?

Long Drain: the dishwasher is not draining.

What is the knockout plug?

A new sink disposer ships with a knockout plug in its dishwasher port, and that plug has to come out before the dishwasher can drain.

How is F9E1 flashed?

Nine flashes of the Clean light, a pause, then one flash.

Is 9-1 the same as F9E1?

Yes. Old pages wrote the code as 9-1.

When should I book a technician?

If F9E1 returns after the filter, hose, disposer and suds checks and a power cycle.

Let’s take care of it.

Something on the display?
Send us the details.