What it means
Showroom is a display mode that turns cooling off and leaves only the interior lighting active. If your freezer is lit but warm, hold the top and bottom zone icons together for three seconds to deactivate it.
JennAir freezer Showroom / Mode, not a failure
Showroom is a display mode that turns cooling off and leaves only the interior lighting active. If your freezer is lit but warm, hold the top and bottom zone icons together for three seconds to deactivate it.
Also shown as Showroom
Showroom is a display mode that turns cooling off and leaves only the interior lighting active. If your freezer is lit but warm, hold the top and bottom zone icons together for three seconds to deactivate it.
Press both at the same time for three seconds.
The two-icon hold does nothing.
Checks you have ticked / saved in this browser

Press both at the same time for three seconds.

Only the interior lighting stays on in this mode.

Give the freezer time to pull down after cooling resumes.

A freezer in showroom mode does not hold temperature.
Send the model and the checks you have already run, then begin your request from this page.
Book a visitA simplified drawing, because layouts change with the model. Tap an outlined part to see a photo and the related check.
A mode used when the freezer is on display in a retail store, or to turn the cooling off.
Read the supporting manualPress and hold the top and bottom zone icons simultaneously for three seconds.
Read the supporting manualThe freezer is lit but not cold and the other controls do not act.
Read the supporting manualIf the hold does not turn cooling back on, or the freezer is warm afterward.
Read the supporting manualManufacturer document
JennAir (use and care guide)
W11362247 Rev. C / p. 10
Scope: JennAir column freezer in use and care guide W11362247 Rev. C (freezer controls, item 7).
Showroom mode deactivates every function except interior lighting.
Press and hold the top and bottom zone icons together for three seconds. The same press turns it off.
The guide says it can also be used to turn the cooling off.
Frozen food will thaw, so turn it off before storing food.
Code or symptom, part, service call
The Power Outage indicator tells you the power supply to the freezer has been off and the freezer temperature has risen. It is a report, not a part failure. Check frozen food, then confirm the freezer returns to its set temperature.
JennAir lists six checks for a column freezer that is not cooling: the power supply, the breaker, whether the freezer is turned on, Showroom mode, a big food load, and a new install. A new freezer needs 24 hours, and a large warm load takes hours to settle.
Schedule a diagnostic for your model, carried out at the appliance.
Office details, plus the access notes to pass along.