Independent appliance repair

What changed? Start with the symptom.

A rattle, a leak, a cycle that cuts out. Pick your appliance and follow what you noticed.

A technician opening the cavity of a built-in wall oven
Experienced techniciansWarranty on our workmanshipOEM parts available on orderUpfront pricing, agreed before work

11 problems explained

Wall ovens

Ranges & ovens in a thoughtfully designed home
Oven repair

JennAir oven temperature problems

JennAir says not to judge oven temperature with a thermometer, because the elements cycle and most thermometers react too slowly.

JennAir range burner problems

Find your cooktop type first.

JennAir oven door problems

Most JennAir door complaints trace to something blocking the latch, a rack or pan that is not seated, or a door put back on wrong.

JennAir range burner won't light

JennAir's order for a gas burner that clicks or will not light starts at the gas shut-off, then the circuit, moisture, a cap that sits crooked and clogged ports.

JennAir oven light not working

Where JennAir publishes a bulb procedure, the oven light is a 40-watt appliance bulb, and the power must be off before you touch it.

JennAir range shuts off

A JennAir oven that appears to shut off is usually doing one of three normal things: cycling its elements, losing heat because the door is open, or the door switch sensing an unseated door.

JennAir oven controls not responding

Check the JennAir message first.

JennAir oven fan problems

A fan running in a JennAir oven is usually normal.

JennAir oven not heating

Start with what JennAir lists: the door is fully closed, the breaker is on, a new install is wired correctly, and for gas the main valve is open.

JennAir oven won't start

If nothing on a JennAir oven responds, JennAir's order is power and supply first: new-install wiring or the gas valve, the breaker, a recent outage, then the control lock, a delayed start and demo mode.

JennAir oven self-clean problems

JennAir ovens may have a steam clean, a high-temperature clean or an AquaLift cycle, and each has its own preparation.

F-codes and more

A letter, a number.
A meaning you can read.

JennAir ovens, dishwashers and refrigerators print many codes. Look yours up in plain language before you decide what to do next.

JennAir error codes
Oven code finder

F9 on a JennAir wall oven most often means the oven was wired wrongly at the home supply or the hard-wire connection, with L2 and N swapped as the example; a steam oven page gives only a reset. Call an electrician before using the oven again.

Read the F9 checks
Or choose

201 researched oven codes. Each model reads codes its own way, so go by your own manual.

Here to help

Good questions.
Clear answers.

Talk to our team
My oven acts up but shows nothing. Where do I start?

Start with your appliance and then the symptom nearest yours. Every page gives checks that are safe and says where to stop. No page names a part.

Two symptoms at once. What should I do?

Open both pages and mention both when you book. A common cause is possible, and the technician benefits from the whole picture.

Will a page identify the failed part?

No. A page covers the usual territory of a symptom and nothing more. A technician working on the unit is the one who finds the part.

When must I stop and call?

If you smell gas or scorching, see sparks, or find water by an outlet. When safe, cut the breaker or close the supply, and then request a technician.

Let’s take care of it.

Something on the display?
Send us the details.