Diagnostics and repair
Seasoned technicians inspect the appliance before suggesting any work. OEM parts are available on order, matched to your model.
Display reference
Choose the appliance, then enter the code on its display. A JennAir code is read against the model.
F9 on a JennAir wall oven most often means the oven was wired wrongly at the home supply or the hard-wire connection, with L2 and N swapped as the example; a steam oven page gives only a reset. Call an electrician before using the oven again.
Read the F9 checks201 researched oven codes. Each model reads codes its own way, so go by your own manual.
Cooktop, microwave, coffee machine and undercounter codes have their own JennAir code libraries. FR and a bare F are printed nowhere. FBE1, FBE2, FEE8, F13 and F7E2 name no cause, only a reset.

Researched 201 codes, each with its sources and model limits.

Researched 12 codes, each with its sources and model limits.

Researched 25 codes, each with its sources and model limits.

Researched 9 codes, each with its sources and model limits.

Researched 2 codes, each with its sources and model limits.

Researched 6 codes, each with its sources and model limits.

Researched 4 codes, each with its sources and model limits.

Researched 3 codes, each with its sources and model limits.

See what the manuals cover and which display names remain unresolved.

Researched 14 codes, each with its sources and model limits.

Researched 13 codes, each with its sources and model limits.

Researched 1 codes, each with its sources and model limits.
Record the appliance type, the model and every character shown on the display as one set.
A message suggests where to look. It cannot settle which part should be replaced.
Seasoned technicians inspect the appliance before suggesting any work. OEM parts are available on order, matched to your model.
If JennAir's manufacturer warranty covers the repair, JennAir itself does the work. We back our own workmanship with a warranty.
Twelve single-code pages: six oven prefixes and six dishwasher codes. F7 and FC have prefix pages, and over two hundred other codes sit as anchored rows on family pages. Each meaning comes from a Product Help article.
Many JennAir codes share a prefix and read as a group, such as F1 and its sub-codes. One page explains the group once, and each printed code gets an anchored row you can link to.
Not always. Product Help words some codes differently for a range, a wall oven or a professional-style range. The page keeps each product type in its own row.
JennAir prints neither bare. Product Help lists F7 with an E-suffix and FC with E1 to E9. Those pages show the printed pairs and say what is not printed.
Capture the entire screen with your camera and copy the model number off its label. Hand both over at booking; a technician sees what no chart can.
Code or symptom, part, service call
JennAir says not to judge oven temperature with a thermometer, because the elements cycle and most thermometers react too slowly. Check preheat time, racks, pan spacing and foil first, then run the biscuit test before any calibration.
Schedule a diagnostic for your model, carried out at the appliance.
Office details, plus the access notes to pass along.