Inside the appliance
Refrigerator air filter. In plain English.
Some JennAir refrigerators have a Freshflow air filter that reduces food odors. A colored icon shows its status: blue is good, yellow means order a replacement, red means replace it, and flashing red means expired. After a change, hold AIR FILTER for 3 seconds to reset.

Where it fits.
Refrigerator air filter in the appliance
Inside the fresh-food compartment, with the status icon on the control panel.
The picture shows the kind of component only. It cannot tell you which replacement suits your model.
What you notice when this system needs a look.
A Refrigerator air filter concern may show up with a drop in performance or a code that keeps returning. Testing comes first, before anyone decides the component is to blame.

JennAir refrigerator light not working
On a JennAir the interior lights turn themselves off after the door has been open 10 minutes. Close every door for 1 minute to reset. Then check the door switch, the wiring plug after a delivery, Sabbath mode and the bulb.

JennAir refrigerator frost and condensation
JennAir calls a little moisture normal: small ice droplets on the freezer walls and back panel, and sweat on the center mullion or cabinet flanges in humid weather. Check doors, seals, vents and settings before assuming a defrost problem.
Owner care, within the model instructions.
Turn the appliance off and unplug it before any check you can do yourself. Look out for pooled water and sharp edges. Never touch a wet plug or live area, take off service panels, or go past your model’s owner instructions.
- 1
Read the icon color
Blue means Good. Yellow means order a replacement. Red with "Replace Filter" means replace it. Red with "Replace Filter" flashing means expired.
- 2
Reset after replacing
Press and hold AIR FILTER for 3 seconds. The icon returns to blue and the Replace Filter text disappears.
- 3
Reset works at any stage
The page notes the 3-second press sets the status back to Good at any point. Do not do it before changing the filter.
- 4
Check your model
Directions vary by model number, so confirm in your owner literature.
Cleaning or replacement?
Leave internal testing to a technician.
Book us if the icon stays red after a new filter and a reset.
Book us if the display shows Flashing F, which JennAir treats as a separate code.
Book us if odors persist with a fresh filter and a clean interior.
Arrange a diagnosticSources and model boundaries.
The Refrigerator air filter guidance rests on these references. Pick the manual that fits your model.
- Air Filter Indicator Light - Refrigerator - Product Help | JennAir
- Flashing "F" - Error Code - Built-In Refrigerator - Product Help | JennAir
Go by the instructions for your own model. See how we research these pages.
Does every JennAir refrigerator have an air filter?
No. The page covers models with the Freshflow filter and its control icon. Check your control panel for the air filter button.
How long does it last?
The help page gives no month count. It uses the icon colors to tell you when to order and when to replace.
Does a red icon mean the refrigerator is broken?
No. It reports filter life. It is not an error code.
Can I reset it early?
Yes, but only reset once a new filter is in, or the icon will no longer track the old filter.
Code or symptom, part, service call
Tie the message to what comes next.
JennAir refrigerator light not working
On a JennAir the interior lights turn themselves off after the door has been open 10 minutes. Close every door for 1 minute to reset. Then check the door switch, the wiring plug after a delivery, Sabbath mode and the bulb.
Refrigerator repair
Schedule a diagnostic for your model, carried out at the appliance.
Find your metro
Office details, plus the access notes to pass along.

