Maintenance

Changing a JennAir refrigerator water filter

A JennAir refrigerator water filter should be changed about every 6 months, when the indicator light comes on, or sooner if the flow drops. Thin or hollow ice, odd-tasting water and a slow dispenser are signs. Use a genuine everydrop filter, and flush the system after you change it. [1][3][4]

A hand fitting a white water filter cartridge into the base grille of a refrigerator, a glass of water nearby.
Experienced techniciansWarranty on our workmanshipOEM parts available on orderUpfront pricing, agreed before work
On this page
Key points
  • Replace about every 6 months, when the light comes on, or as needed. 12
  • Thin or hollow ice, slow dispensing and odd taste are warning signs. 1
  • A filter with no indicator should be changed at least every 6 to 9 months. 2
  • Flush the system after each change to clear air and carbon dust. 13
  • Counterfeit filters can leak and fail to filter. 4

When does a JennAir refrigerator water filter need replacing?#

About every 6 months, when the indicator light comes on, or as needed. JennAir says filters reduce sediment, chlorine taste and odor and some contaminants, and that over time the filter media fills up and works less well. 1

If your refrigerator has no indicator light, change the filter at least every 6 to 9 months, and sooner if the flow to the dispenser or ice maker noticeably drops before 6 months. Decreased flow is a sign that it is clogged. 2

JennAir also says an indicator, called a PID, lights after 200 gallons of use on refrigerators that have one, and at 100 gallons on those that do not. 3 The count depends on how much water you use, which is why a busy household may change filters sooner than a calendar suggests.

Your refrigeratorChange the filterSource
Has a filter status lightWhen the light says so, or about every 6 months12
No status lightAt least every 6 to 9 months2
Flow drops earlySooner than 6 months2
Spare filters on the shelfThey do not expire3

What are the signs of an old filter?#

A clogged or incorrectly installed filter cuts the water flow to the ice maker and dispenser. JennAir lists thin or hollow ice cubes, odd-tasting ice or water, low or no ice, a measure-fill function that is not working, no water or slow water from the dispenser. 1

  • Ice cubes are thin or hollow.
  • Ice or water tastes odd.
  • Ice production is low, or there is none.
  • Measured fill is not working correctly.
  • Water dispenses slowly, or not at all. 1

Most of those can have other causes, such as a closed water supply or a frozen line, so test the filter before you replace anything else.

How do I test whether the filter is the problem?#

Compare the flow with and without it. Dispense water and note the amount, remove the filter, then dispense again. If the flow increases noticeably, the filter is clogged or installed wrong, and a clogged one needs replacing. 1

  1. 1

    Dispense water and note the flow#

    Fill a glass and watch how long it takes. 1

    Hand pressing the paddle of a black refrigerator dispenser while the other hand holds a glass filling with water.
  2. 2

    Find and remove the filter#

    It is in the base grille below the refrigerator compartment door, or inside the refrigerator compartment. Follow your owner's manual to remove it. 1

  3. 3

    Dispense again with it out#

    If the flow noticeably improves, the filter is clogged or incorrectly installed. 1

  4. 4

    Fit a new filter if you have one#

    If you cannot replace it right away, leave the filter out. The system bypasses it and keeps working, but the water will not be filtered. 1

If the old filter will not come out, JennAir says to follow your owner's manual first, and then use its tips for removing a stuck filter. 6 Do not force it with a tool, since a cracked housing is a bigger repair than a stuck cartridge.

Why do I need to flush the system?#

Because a new filter brings air and carbon dust with it. JennAir says to flush the system every time you change the filter or first connect the refrigerator to a water supply, to remove air and prepare the filter. 13

Skipping it has visible results. Air in the lines can make the dispenser drip, produce small or hollow ice cubes or cloud the water. 35 The flush runs water through the filter for a designated time, so follow the time and steps in your owner's manual for your model. 5

After the flush, the status light still needs attention on models that have one. JennAir says it does not reset by itself on most models and gives the button sequence for each type, so look in the owner's manual for yours. 2

Hand holding a glass under a refrigerator water dispenser, a stream running in with a few bubbles.
Flush the new filter until the stream runs clear of air and carbon dust. 35

What if the filter leaks or drips after I change it?#

Check the seating, the O-ring and the housing. JennAir lists a worn or missing O-ring, a filter that is not fully seated or is cross-threaded, a cracked housing or head, and kinked or clogged water lines as frequent sources. A filter that does not fit properly can also cause drips. 5

If the filter was just installed, take it out, reinstall it straight, align the marks or tabs your model specifies and tighten by hand until snug. Over-tightening can distort the seals and lead to another leak. 5 If the filter is cracked, damaged or missing its O-ring, replace the filter. 5

A steady drip at the filter area needs fast attention, to prevent water damage, and if the leak continues after you reseat a new filter, close the water supply and book a visit. 5

How do I avoid counterfeit filters?#

Buy from the sellers JennAir names, and look at the box. JennAir warns that fakes copy labels, logos and model numbers but skip required testing, and can mean poor water quality, a leaking refrigerator and a voided warranty for damage they cause. 4

Watch for these signs. 4

  • Misspellings, blurry or off-color printing and inconsistent fonts.
  • Missing certification logos, or questionable ones.
  • Model numbers that do not follow the JennAir format. Make sure the filter matches your owner's manual.
  • Unsealed boxes, poor cardboard or badly applied stickers.
  • A price far below the usual one, or a package shipping from outside the United States.
  • Unknown third-party sellers with generic pages and little contact information.

JennAir says to buy directly from JennAir, everydrop or from major retailers and service providers that JennAir names as approved sellers. On online marketplaces, check that the seller is JennAir or a named seller with a clear business name and contact details. 4

Hands turning over a plain white cardboard filter box to look at its side panel in a modern kitchen.
Check the print, seal and model number on the box before you buy. 4

When does a new filter still not fix it?#

When the filter is genuine, new and seated correctly, and the flow, the leak or the ice still does not improve. Those point to the water lines, the valve or the ice maker, not the filter.

The water filter entry describes the part, the dispenser problems page and ice maker problems page cover what comes next, and what we repair is on our refrigerator service page.

Sources#

  1. Does the Water Filter Need to be Replaced? - Product Help | JennAirJennAir Product Help (producthelp.jennair.com) · dateModified 2026-05-21; PH 1657 · PH 1657
  2. How to Reset the Water Filter Status Light - Product Help | JennAirJennAir Product Help (producthelp.jennair.com) · dateModified 2026-09-03; PH 428 · PH 428
  3. everydrop Water Filter Questions - Product Help | JennAirJennAir Product Help (producthelp.jennair.com) · dateModified 2026-05-21; PH 12001 · PH 12001
  4. How to Avoid Purchasing Counterfeit Filters - Product Help | JennAirJennAir Product Help (producthelp.jennair.com) · dateModified 2026-05-21; PH 12362 · PH 12362
  5. What to Do if the Water Filter is Damaged or Dripping - Product Help | JennAirJennAir Product Help (producthelp.jennair.com) · dateModified 2026-05-21; PH 1656 · PH 1656
  6. Water Filter Stuck - Can't Remove - Built-In Refrigerator - Product Help | JennAirJennAir Product Help (producthelp.jennair.com) · dateModified 2025-05-22; PH 9934 · PH 9934

Here to help

Good questions.
Clear answers.

Talk to our team
How often should I replace the water filter?

JennAir recommends every 6 months, when the indicator light comes on, or as needed. Without an indicator light, change it at least every 6 to 9 months, and sooner if the flow drops. See sources 1 and 2.

How can I tell if the filter is clogged?

Dispense water, note the flow, remove the filter and dispense again. If the flow clearly improves without it, the filter is clogged or not installed correctly. See source 1.

Can I run the refrigerator with the filter out?

Yes, for a while. With the filter removed the water system bypasses it and keeps working, so a clogged filter will not slow the flow. You will not have filtered water until a new one goes in. See source 1.

Why flush the water system after changing the filter?

Air in the lines can make the dispenser drip, cause small or hollow ice cubes and cloud the water. JennAir says to flush the system every time the filter is changed. See sources 1 and 3.

Do unused filters go bad on the shelf?

JennAir says water filters do not have an expiration date, so you can keep spares at home. A counterfeit one can fail to filter and leak, so buy from sellers JennAir names. See sources 3 and 4.

Let’s take care of it.

Something on the display?
Send us the details.