Start from the symptom

JennAir freezer column ice maker producing no ice.

First confirm the ice maker is on, since Ice Maker Off lights when it is not. Then check the water line, water pressure, the filter and Showroom mode. A new installation needs 24 hours for the first batch, and the first three batches should be discarded.

Last reviewed

Open column freezer drawer with an almost empty ice bin holding a few stuck-together cubes, and the ice maker arm raised above it.
Experienced techniciansWarranty on our workmanshipOEM parts available on orderUpfront pricing, agreed before work

Start with safe observations.

Turn the appliance off and unplug it before any check you can do yourself. Look out for pooled water and sharp edges. Never touch a wet plug or live area, take off service panels, or go past your model’s owner instructions.

  1. 1

    Check the Ice Maker Off light

    If Ice Maker Off is lit, press the button to resume ice production.

  2. 2

    Check the water supply

    The line has to be connected to a cold water supply with the shutoff valve fully open.

  3. 3

    Think about water pressure

    Low pressure can mean slow or no ice, small or hollow cubes and slow dispensing. A reverse osmosis system can reduce pressure further.

  4. 4

    Replace the water filter

    JennAir suggests a new filter twice a year, at the indicator, or sooner if needed. A clogged filter cuts ice output.

  5. 5

    Rule out Showroom mode

    In Showroom mode the word lights on the display and most functions are off.

  6. 6

    New install: wait

    Allow 24 hours for the first batch, discard the first three, and allow 2 to 3 days to fill the bin. Normal output is about 3.2 lbs a day.

More about this symptom.

What does JennAir say to check first?#

Whether the unit is turned on, since the Ice Maker Off light shows when it is not. Then the water line, shutoff valve, pressure and filter.

What affects water pressure?#

The household supply and any reverse osmosis system. JennAir says low pressure can lead to small or hollow cubes and to slow or no ice production.

What should decide between trying again and a visit?#

When the unit is on, the water supply and filter are right and a day or more has passed with no ice. The water inlet and the ice maker then need testing.

If the display adds a code.

No code tied directly to this topic.

No further researched dishwasher code is attached to this topic. Compare your exact message with your model manual and do not stand in a different code from the library.

See the research status

When observation becomes a service request.

Leave internal testing to a technician.

No ice appears after 24 hours on a new install.

Cubes are small or hollow even with a fresh filter.

The water line is open but the dispenser is slow.

The ice maker stays off after you press its button.

Arrange a diagnostic

Sources and model boundaries.

The JennAir column ice maker producing no ice guidance rests on these references. Pick the manual that fits your model.

  • Ice Maker Not Making Ice - Column - Product Help | JennAir
  • Low Ice Production - Column - Product Help | JennAir

Go by the instructions for your own model. See how we research these pages.

Here to help

Good questions.
Clear answers.

Talk to our team
How much ice should a JennAir column make a day?

Under normal operation, approximately 3.2 lbs (1.5 kg) a day, according to JennAir. Allow 2 to 3 days after install for the storage bin to fill.

Should I keep the first ice?

No. JennAir says to throw out the first three batches. On a new install, the first batch takes about 24 hours.

Can the water filter be the culprit?

Yes. A clogged or badly seated water filter can restrict flow to the ice maker and dispenser, causing low ice and slow water. JennAir recommends a new one every 6 months.

Why are my ice cubes small or hollow?

Low water pressure is the usual cause. JennAir links it to small or hollow cubes, slow or no ice and slow dispensing. Reverse osmosis systems can lower pressure further.

Is Showroom mode really a cause?

Yes. In that mode the cooling can be off and the controls do not execute commands. The display says Showroom. Turn it off, and the ice maker can run again.

Let’s take care of it.

Something on the display?
Send us the details.