Inside the appliance
Column ice maker. In plain English.
The ice maker inside a JennAir column makes about 3.2 lbs of ice a day once running. JennAir’s no-ice checks cover the on button, the water line, water pressure, the filter and showroom mode. The first batch takes a day, and the first three are thrown away.

Where it fits.
Column ice maker in the appliance
The pages do not locate it inside the column.
The picture shows the kind of component only. It cannot tell you which replacement suits your model.
What you notice when this system needs a look.
A Column ice maker concern may show up with a drop in performance or a code that keeps returning. Testing comes first, before anyone decides the component is to blame.

JennAir column freezer not cooling
JennAir lists six checks for a column freezer that is not cooling: the power supply, the breaker, whether the freezer is turned on, Showroom mode, a big food load, and a new install. A new freezer needs 24 hours, and a large warm load takes hours to settle.

JennAir column ice maker producing no ice
First confirm the ice maker is on, since Ice Maker Off lights when it is not. Then check the water line, water pressure, the filter and Showroom mode. A new installation needs 24 hours for the first batch, and the first three batches should be discarded.
Owner care, within the model instructions.
Turn the appliance off and unplug it before any check you can do yourself. Look out for pooled water and sharp edges. Never touch a wet plug or live area, take off service panels, or go past your model’s owner instructions.
- 1
Check it is on
If Ice Maker Off is lit, the ice maker is not on. Press the button to resume production.
- 2
Check the water supply
The water line must connect to cold water, with the shutoff valve fully open.
- 3
Look at pressure and the filter
Low water pressure can reduce ice, and RO systems can reduce it further. JennAir advises replacing the filter every six months or when the light comes on.
- 4
Allow the start-up time
Allow 24 hours for the first batch and discard the first three. Filling the bin takes 2 to 3 days.
Cleaning or replacement?
Leave internal testing to a technician.
Book us if ice is still missing with the ice maker on, the water open and the filter new.
Arrange a diagnosticSources and model boundaries.
The Column ice maker guidance rests on these references. Pick the manual that fits your model.
- Ice Maker Not Making Ice - Column - Product Help | JennAir
- Low Ice Production - Column - Product Help | JennAir
Go by the instructions for your own model. See how we research these pages.
How much ice should a column make?
Approximately 3.2 lbs (1.5 kg) a day under normal operation.
How long for the first ice?
About 24 hours. Discard the first three batches and allow 2 to 3 days to fill the bin.
Can the filter stop ice?
A clogged filter can cause low or no ice. JennAir says to replace it every six months, when the light comes on or as needed.
Does an RO system affect it?
It can. Reverse osmosis systems can further reduce water pressure.
Code or symptom, part, service call
Tie the message to what comes next.
JennAir column freezer not cooling
JennAir lists six checks for a column freezer that is not cooling: the power supply, the breaker, whether the freezer is turned on, Showroom mode, a big food load, and a new install. A new freezer needs 24 hours, and a large warm load takes hours to settle.
Freezer repair
Schedule a diagnostic for your model, carried out at the appliance.
Find your metro
Office details, plus the access notes to pass along.

