Start from the symptom
JennAir ice maker noises: normal and not.
Most ice maker noises are normal: splashing, water running when it starts, a bang as ice drops, and the reservoir overflowing. A loud high-pitched sound while filling can mean supply pressure above 60 psi, where 50 psi is recommended.

Start with safe observations.
Turn the appliance off and unplug it before any check you can do yourself. Look out for pooled water and sharp edges. Never touch a wet plug or live area, take off service panels, or go past your model’s owner instructions.
- 1
Match the sound
Splashing is water running from the evaporator plate. Water running at start-up is the rinse cycle. Banging is ice falling into the bin.
- 2
Listen to the fill
A loud high-pitched sound during filling is linked to water pressure above 60 psi. A licensed plumber can lower supply pressure to about 50 psi.
- 3
Level the unit
An unlevel unit vibrates more. Put it on a level surface and keep it from walls or appliances that amplify sound.
- 4
Clean the condenser coils
Dust makes the machine work harder and louder. JennAir suggests every six months.
- 5
Empty and clean the bin
Clean the bin regularly and wipe the interior with warm water and mild soap. Replace the water filter as recommended.
More about this symptom.
Which ice maker noises are normal?#
Splashing, running water at start-up, banging as ice falls, and overflow while ice is made. JennAir says most of the noises the machine makes while producing ice are normal.
What does high water pressure do?#
It can cause a loud high-pitched sound as water flows through the inlet valve. JennAir recommends reducing supply pressure to 50 psi through a plumber.
When is a noise a repair?#
When it is new and harsh, such as grinding or rattling, and does not change after leveling and cleaning. Book a technician and describe when in the cycle it happens.
Systems a technician may investigate.
The symptom connects to these parts. What you observed cannot show that any single one has failed.

Ice maker condenser and cleaning
The air-cooled condenser has to be kept clean along with the ice-making system. JennAir says to clean the ice maker when its cleaning light shows, once nine months have passed, or when ice output drops. Condenser coils collect dust and need cleaning about every six months to avoid extra work and noise.

Ice maker water filter
The freestanding ice maker has a water filter on a nine-month life. JennAir wants it swapped then, or sooner if the ice rate drops. The Replace Filter light waits for 9 months or 2,000 gallons of use. A filter that is cracked, loose or missing O-rings can cause thin, small or no ice.
If the display adds a code.
No code tied directly to this topic.
No further researched dishwasher code is attached to this topic. Compare your exact message with your model manual and do not stand in a different code from the library.
See the research statusFollow the care instructions written for this appliance.
When observation becomes a service request.
Leave internal testing to a technician.
The noise is grinding or rattling rather than splashing, water or banging.
A loud sound continues after you level the unit and clean the coils.
The unit makes noise but no ice.
Water pressure is high and you cannot lower it.
Arrange a diagnosticSources and model boundaries.
The JennAir ice maker noises: normal and not guidance rests on these references. Pick the manual that fits your model.
- Freestanding Ice Maker Noises - Product Help | JennAir
Go by the instructions for your own model. See how we research these pages.
Why does my ice maker run water for a long time at start-up?
JennAir says the ice maker is programmed to run a rinse cycle before it starts making ice, so water runs continuously at first. This is normal.
Why is there a bang when ice drops?
Ice falling into the bucket makes a banging noise, which JennAir says is usually louder when the bucket is empty. It is normal.
What causes a high-pitched sound when filling?
Supply water pressure above 60 psi. JennAir suggests a licensed, qualified plumber find the best way to reduce pressure, and gives 50 psi as the recommended level.
Is overflow noise normal?
Yes. During ice making you may hear the reservoir overflowing. That overflow purges minerals removed from the water.
How do I make my ice maker quieter?
Level it, keep it clear of walls and appliances that amplify sound, clean the condenser coils every six months and keep the bin and filter maintained.
Code or symptom, part, service call
Tie the message to what comes next.
JennAir ice maker not making ice or stopped
When a freestanding ice maker goes quiet, look for a dirty or blocked bin sensor, a cracked or badly locked water filter, or a cleaning cycle that was cut short. Check those, level the unit and restart it. A service light that returns means a repair.
Ice maker water filter
The freestanding ice maker has a water filter on a nine-month life. JennAir wants it swapped then, or sooner if the ice rate drops. The Replace Filter light waits for 9 months or 2,000 gallons of use. A filter that is cracked, loose or missing O-rings can cause thin, small or no ice.
Ice maker repair
Schedule a diagnostic for your model, carried out at the appliance.
Find your metro
Office details, plus the access notes to pass along.