Independent appliance repair

JennAir ice maker repair, with care.

We repair JennAir freestanding and undercounter ice makers with a blinking Cleaning, Filter or Service light, thin ice, no ice or ice stuck on the cutting grid. Tell us which light shows, then book a technician.

Ice makers in a thoughtfully designed home
Independent service. Considered care.
Experienced techniciansWarranty on our workmanshipOEM parts available on orderUpfront pricing, agreed before work
Wall ovensRefrigeratorsDishwashersCooktopsFreezersIce makersWine coolersBeverage centersHoodsMicrowavesCoffee machinesRangesError code helpWarranty on our workmanship

A message on the display?

No code tied directly to this topic.

No further researched dishwasher code is attached to this topic. Compare your exact message with your model manual and do not stand in a different code from the library.

See the research status

Parts selected after a diagnostic.

We have not read a full Product Help library for this appliance, so we promise no part and no price in advance. The technician diagnoses on site and agrees the work with you first.

Dark modern kitchen with walnut cabinets, wall ovens and a steel refrigerator beside a wall of faint part drawings.

Component reference

This component has no illustrated glossary entry on the site. Lean on the system described in the text and the model manual cited; a code by itself does not point to a replacement.

Explore the researched parts

Tell us the symptom.
Leave the rest to us.

What happens on a visit.
No surprises in your kitchen.

  1. A technician at a front door with a case of tools
    1

    Share the details

    Tell us which appliance, what the display shows and where it is installed. A photo of the model plate helps.

  2. A technician reading a built-in oven display
    2

    Find the cause

    The technician inspects the unit, explains the likely cause and agrees the cost with you before starting.

  3. A tidy built-in oven bank after service
    3

    Check and explain

    When the work is done, the technician tests the appliance and walks you through what was fixed.

Prepare for the ice maker visit.

  1. 1

    Clean when it asks

    Run the clean cycle when Cleaning Needed lights, after 9 months, or when output drops. Hard water can need cleaning every 6 months. The cycle takes about 70 to 90 minutes and ends with Cleaning Complete.

  2. 2

    Resume an interrupted clean

    If the Clean light keeps blinking after a stop, press Clean to resume. If it persists after a restart, press Clean so the cycle can finish.

  3. 3

    Check the filter

    The Replace Filter light comes on after 9 months or 2,000 gallons. A filter not turned to the locked position, a cracked one or a missing O-ring can cut ice or make it thin.

  4. 4

    Restart once

    Unplug the ice maker or switch off its breaker to reset the controls, then watch the lights.

  5. 5

    Respond to the Service light

    Switch the ice maker off and on. If the Service light comes on again, book a visit.

Leave internal testing to a technician.

Book us if the Service light returns after switching off and on.

Book us if the Filter or Cleaning light stays lit after the steps above.

Book us when water reaches the floor and the filter area or a line does not explain it.

Arrange a diagnostic

Real scope. Clear expectations.

9US metro areas
12Appliance types
290Code explanations

The agreement comes first.

Before work starts

Before any work begins, the technician tells you what is needed and settles the cost with you. A built-in appliance may need to be examined on site before that figure is firm.

Workmanship coverage

If JennAir's manufacturer warranty covers the repair, JennAir itself does the work. We back our own workmanship with a warranty.

Here to help

Good questions.
Clear answers.

Talk to our team
How often do I clean a JennAir ice maker?

JennAir says when Cleaning Needed lights, after 9 months, or when ice output falls. Hard water may need cleaning every 6 months.

How long is the clean cycle?

About 70 to 90 minutes. The display changes to Cleaning Complete when it is done.

What does the Service light mean?

The ice maker needs service. Turn it off and on; if the light returns, book a visit.

Are its noises normal?

JennAir has a page on freestanding ice maker noises, from compressor hum to water filling the mold, and calls typical ones normal operation.

Does warranty coverage change who repairs my ice maker?

An ice maker still covered by the manufacturer’s warranty is the manufacturer’s repair. After coverage, our technician quotes after the diagnostic.

Let’s take care of it.

Something on the display?
Send us the details.