What it means
On a JennAir column refrigerator or freezer, some features are tied to the perimeter lighting. If the interior light flashes, JennAir asks whether a new cooling zone was just selected. Pressing a zone key lights that zone.
JennAir refrigerator Interior light flashing / Columns
On a JennAir column refrigerator or freezer, some features are tied to the perimeter lighting. If the interior light flashes, JennAir asks whether a new cooling zone was just selected. Pressing a zone key lights that zone.
Also shown as Interior light flashing
On a JennAir column refrigerator or freezer, some features are tied to the perimeter lighting. If the interior light flashes, JennAir asks whether a new cooling zone was just selected. Pressing a zone key lights that zone.
A recent zone selection can explain flashing interior light.
The light keeps flashing with no zone change.
Checks you have ticked / saved in this browser

A recent zone selection can explain flashing interior light.

Pressing a zone key lights the matching zone in the refrigerator or freezer.

The light should stop flashing once the selection is accepted.

If it keeps flashing, power the unit down briefly and restore it.
Send the model and the checks you have already run, then begin your request from this page.
Book a visit

A simplified drawing, because layouts change with the model. Tap an outlined part to see a photo and the related check.
JennAir ties select features to the perimeter lighting, so flashing may follow a zone change rather than an error.
Read the supporting manualThe keys on a column that light the corresponding zones in the refrigerator or freezer.
Read the supporting manualJennAir describes a light behavior here, not a numbered code.
Read the supporting manualManufacturer document
JennAir Product Help (producthelp.jennair.com)
dateModified 2024-05-01; PH 9983 / PH 9983 (column)
Covers JennAir column refrigerators and freezers. Source: product page PH 9983, last modified 2024-05-01.
JennAir does not say so. The page ties select features to the perimeter lighting and asks whether a new cooling zone was just selected.
Pressing a zone key lights the corresponding zone in the refrigerator or freezer. The exact key layout depends on the column model.
The page does not say. Check the temperature display for that zone.
Try a short power cycle at the breaker, then book a technician if the zone lights still do not respond.
No. The page describes light behavior, not a code.
Code or symptom, part, service call
On a JennAir the interior lights turn themselves off after the door has been open 10 minutes. Close every door for 1 minute to reset. Then check the door switch, the wiring plug after a delivery, Sabbath mode and the bulb.
Schedule a diagnostic for your model, carried out at the appliance.
Office details, plus the access notes to pass along.