JennAir refrigerator Replace Filter light / Columns

JennAir refrigerator
error Replace Filter light

Refrigerator / display referenceReplace Filter light

On a JennAir column, the Replace Filter icon flashes the whole time water dispenses. After 14 days without a new filter it blinks seven times with three tones at the end of dispensing. Fit a new filter, then hold Filter Reset for three seconds.

Also shown as Replace Filter light

Last reviewed

Refrigerator / display referenceReplace Filter light
Meaning
On a JennAir column, the Replace Filter icon flashes the whole time water dispenses. After 14 days without a new filter it blinks seven times with three tones at the end of dispensing. Fit a new filter, then hold Filter Reset for three seconds.
Who handles it
Information only
Source
Replace Filter Light - Error Code - Column - Product Help | JennAir

What JennAir refrigerator Replace Filter light means.

What it means

On a JennAir column, the Replace Filter icon flashes the whole time water dispenses. After 14 days without a new filter it blinks seven times with three tones at the end of dispensing. Fit a new filter, then hold Filter Reset for three seconds.

What you can safely check

Install the replacement filter.

When to call a technician

The icon keeps flashing after a new filter.

Checks you have ticked / saved in this browser

Safe checks, in order.

0 of 4 checks done
  1. JennAir refrigerator Replace Filter light: Refrigerators in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Before you begin

    Fit a new water filter

    Install the replacement filter. JennAir recommends an everydrop filter.

  2. The black glass control strip of a built-in wall oven above its stainless handle
    Illustration. Follow your model’s instructions.
    Check 2

    Press and hold Filter Reset

    Keep the Filter Reset button pressed for three seconds. A countdown runs.

  3. Over the shoulder view of a person holding a tablet with a blank checklist, a refrigerator behind.
    Illustration. Follow your model’s instructions.
    Check 3

    Confirm the icon turns off

    When the countdown completes, the Replace Filter indicator turns off.

  4. A technician reading a built-in oven display
    Illustration. Follow your model’s instructions.
    Check 4

    Dispense and check

    Draw a glass of water to confirm flow and that the icon stays off.

Still showing Replace Filter light?

Send the model and the checks you have already run, then begin your request from this page.

Book a visit

Cooling and defrost.

Conceptual Refrigerator sectionEvaporatorEvaporator fanDefrost heaterDrain panControl12345
  1. 1Evaporator
  2. 4Drain pan
  3. 5Control

A simplified drawing, because layouts change with the model. Tap an outlined part to see a photo and the related check.

Parts behind the message.

A hand pushing a white cylindrical water filter into its housing under a refrigerator grille.

Component reference

Refrigerator water filter

JennAir recommends replacing the refrigerator water filter every 6 months, when the indicator light comes on, or as needed.

Read the definition

A little more context.

Why does the icon flash while I dispense?

The page says Replace Filter flashes constantly from the beginning to the end of dispensing, as a reminder.

Read the supporting manual

What changes after 14 days?

If the filter still has not been replaced after 14 days, the icon blinks seven times and a tone sounds three times at the end of dispensing.

Read the supporting manual

The manual behind the message.

Manufacturer document

Replace Filter Light - Error Code - Column - Product Help | JennAir

JennAir Product Help (producthelp.jennair.com)

dateModified 2025-05-19; PH 9984 / PH 9984 (column)

Covers the Replace Filter light on JennAir columns. Source: product page PH 9984, last modified 2025-05-19.

Here to help

Good questions.
Clear answers.

Talk to our team
Why does the icon flash only while I dispense water?

JennAir says the Replace Filter icon flashes constantly from the beginning to the end of dispensing as a reminder.

What happens after 14 days?

If the filter is still not replaced, the icon blinks seven times and a tone sounds three times at the end of dispensing.

Why does the icon stay on after a new filter?

It stays illuminated if the filter reset was not completed. Press and hold the Filter Reset button for three seconds.

Which filter does the page recommend?

JennAir recommends an everydrop water filter. We do not supply parts.

What if the pour is weak after the swap?

Reseat the filter and check the water supply, then book a technician if flow stays weak.

Let’s take care of it.

Something on the display?
Send us the details.