JennAir refrigerator Temperature Alarm / Alerts

JennAir refrigerator
error Temperature Alarm

Refrigerator / display referenceTemperature Alarm

The temperature alarm sounds when the refrigerator rises above 48 degrees F (9 C) or the freezer above 15 degrees F (-9 C) for longer than 1.5 hours. The sound stops by itself; the light flashes until you press the alarm key. Column models call it Over-Temp.

Also shown as Temperature Alarm

Last reviewed

Refrigerator / display referenceTemperature Alarm
Meaning
The temperature alarm sounds when the refrigerator rises above 48 degrees F (9 C) or the freezer above 15 degrees F (-9 C) for longer than 1.5 hours. The sound stops by itself; the light flashes until you press the alarm key. Column models call it Over-Temp.
Who handles it
Owner checks first, then a technician
Related codes
Source
Temperature Alarm - Error Message - Built-In Refrigerator - Product Help | JennAir

What JennAir refrigerator Temperature Alarm means.

What it means

The temperature alarm sounds when the refrigerator rises above 48 degrees F (9 C) or the freezer above 15 degrees F (-9 C) for longer than 1.5 hours. The sound stops by itself; the light flashes until you press the alarm key. Column models call it Over-Temp.

What you can safely check

Typical reasons are an outage, an open door or a big load of warm groceries.

When to call a technician

The alarm sounds again after temperatures recover.

Checks you have ticked / saved in this browser

Safe checks, in order.

0 of 4 checks done
  1. JennAir refrigerator Temperature Alarm: Top control panel inside a built-in refrigerator with red indicator marks lit, above glass shelves of kale, radishes, carrots, asparagus and lemons.
    Illustration. Follow your model’s instructions.
    Before you begin

    Check why it warmed up

    Typical reasons are an outage, an open door or a big load of warm groceries.

  2. Refrigerators in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Check 2

    Wait for temperatures to recover

    The audio alarm stops automatically when temperatures return to normal.

  3. The black glass control strip of a built-in wall oven above its stainless handle
    Illustration. Follow your model’s instructions.
    Check 3

    Press the alarm key to clear the light

    The indicator keeps flashing until you press it.

  4. Over the shoulder view of a person holding a tablet with a blank checklist, a refrigerator behind.
    Illustration. Follow your model’s instructions.
    Check 4

    Follow the not-cooling advice if it persists

    If temperatures stay high, the page sends you to its Temperature Concerns section.

Still showing Temperature Alarm?

Send the model and the checks you have already run, then begin your request from this page.

Book a visit

Cooling and defrost.

Conceptual Refrigerator sectionEvaporatorEvaporator fanDefrost heaterDrain panControl12345
  1. 1Evaporator
  2. 4Drain pan
  3. 5Control

A simplified drawing, because layouts change with the model. Tap an outlined part to see a photo and the related check.

A little more context.

What triggers the alarm?

The page sets thresholds at 48 degrees F (9 C) in the refrigerator and 15 degrees F (-9 C) in the freezer, held for longer than an hour and a half.

Read the supporting manual

Does it repeat after a new installation?

After the refrigerator is turned on, the alarm and light can activate every 1.5 hours until temperatures are below those thresholds.

Read the supporting manual

Is there a reset by breaker?

The built-in Over Temperature Reset light has a five-minute breaker reset on a related page.

Read the supporting manual

The manual behind the message.

Manufacturer document

Temperature Alarm - Error Message - Built-In Refrigerator - Product Help | JennAir

JennAir Product Help (producthelp.jennair.com)

dateModified 2021-04-27; PH 9904 / PH 9904 (built-in refrigerator)

Manufacturer document

Temperature Alarm - Refrigerator - Product Help | JennAir

JennAir Product Help (producthelp.jennair.com)

dateModified 2026-01-27; PH 14189 / PH 14189 (French-door refrigerator)

Manufacturer document

Temperature Alarm - Error Code - Column - Product Help | JennAir

JennAir Product Help (producthelp.jennair.com)

dateModified 2024-05-01; PH 9985 / PH 9985 (column)

Manufacturer document

Over Temperature Light - Error Message - Built-In Refrigerator - Product Help | JennAir

JennAir Product Help (producthelp.jennair.com)

dateModified 2021-04-27; PH 9902 / PH 9902 (built-in refrigerator)

Covers the built-in, French-door and column JennAir lines. Sources: PH 9904, PH 14189, column page PH 9985 and PH 9902.

Here to help

Good questions.
Clear answers.

Talk to our team
What triggers the alarm exactly?

The refrigerator above 48 degrees F (9 C) or the freezer above 15 degrees F (-9 C), for longer than 1.5 hours.

The sound stopped but the light still flashes. Why?

The audio alarm shuts off automatically when temperatures return to normal. The indicator keeps flashing until you press the alarm key, to record that over-temperature happened.

What is the Over Temperature Reset on built-in models?

A related built-in page covers a blinking Over Temperature Reset light: breaker off for five minutes, back on, then a few minutes of observation.

Does the alarm repeat after I turn the refrigerator on?

Yes. After the refrigerator is turned on, the audio alarm and light activate every 1.5 hours until both compartments are below those thresholds.

What if temperatures stay high?

The page sends you to its Temperature Concerns section. If the refrigerator is not cooling, book a technician.

Let’s take care of it.

Something on the display?
Send us the details.