Inside the appliance
Hood grease filter. In plain English.
The grease filter catches grease before it reaches the fan. JennAir’s smoke-and-odor page asks if the filter is clean and installed correctly, and says to clean it often so grease does not build up.

Where it fits.
Hood grease filter in the appliance
The page does not locate the filter; your owner’s manual shows where it sits.
The picture shows the kind of component only. It cannot tell you which replacement suits your model.
What you notice when this system needs a look.
A Hood grease filter concern may show up with a drop in performance or a code that keeps returning. Testing comes first, before anyone decides the component is to blame.

JennAir hood leaving cooking smoke in the kitchen
JennAir lists five checks: controls, a clean grease filter, a recirculating charcoal filter that is clogged, air movement in the room, and the vent installation. Turn the hood on first and keep it running for a few minutes once you finish.

JennAir vent hood lights not working
Check three things: the control settings, the bulbs, and a power reset. JennAir says that if the vent hood fan operates, the lights should operate, so a working fan with dead lights points to the bulbs or the light circuit.
Owner care, within the model instructions.
Turn the appliance off and unplug it before any check you can do yourself. Look out for pooled water and sharp edges. Never touch a wet plug or live area, take off service panels, or go past your model’s owner instructions.
- 1
Check it is installed
The hood should run with the filter properly installed, not left out.
- 2
Clean it often
JennAir says to clean the grease filter often to avoid buildup. The owner’s manual covers the method.
- 3
Run the hood longer
Start it before cooking and leave it on several minutes after to clear smoke and odors.
- 4
Check the room
Ceiling fans, air vents and a too-tight house can work against the hood.
Cleaning or replacement?
Leave internal testing to a technician.
Book us if smoke still hangs after a clean filter and a correct control setting.
Book us if the fan runs but the hood is loud or weak.
Arrange a diagnosticSources and model boundaries.
The Hood grease filter guidance rests on these references. Pick the manual that fits your model.
- Vent Hood not Removing Smoke or Odor - Product Help | JennAir
- Poor Cooking Performance when Using a Retractable Downdraft Vent Hood - Product Help | JennAir
Go by the instructions for your own model. See how we research these pages.
Why is my hood not removing smoke?
JennAir lists the controls, a dirty or misplaced grease filter, a restricted recirculating filter, room air currents, make-up air, cabinets and installation.
How often to clean the filter?
JennAir says often, without a number. Check your manual for the method.
When should the hood start?
Before cooking, and several minutes after.
Can a tight house affect it?
Yes. Exhausted air must be replaced, and some codes require make-up air.
Code or symptom, part, service call
Tie the message to what comes next.
JennAir hood leaving cooking smoke in the kitchen
JennAir lists five checks: controls, a clean grease filter, a recirculating charcoal filter that is clogged, air movement in the room, and the vent installation. Turn the hood on first and keep it running for a few minutes once you finish.
Hood repair
Schedule a diagnostic for your model, carried out at the appliance.
Find your metro
Office details, plus the access notes to pass along.

