Start from the symptom
JennAir range oven noises: clicks, pops, whooshes, fans.
Most oven sounds on a JennAir gas range are normal: ignitor clicks every 1 to 3 minutes, a pop as the gas valve opens, a whoosh when gas ignites, popping as metal heats, and cooling or convection fan sound. A fan that keeps running after the oven goes off is normal too.

Start with safe observations.
Turn the appliance off and unplug it before any check you can do yourself. Look out for pooled water and sharp edges. Never touch a wet plug or live area, take off service panels, or go past your model’s owner instructions.
- 1
Clicking
Ignitors click a few times until a flame is detected, a sound like a nail tapping glass, and it repeats each 1 to 3 minutes through a cycle.
- 2
Whoosh or poof
Gas igniting at the bake or broil element makes a whooshing sound every 1 to 3 minutes.
- 3
Popping
Porcelain and steel expanding and contracting can pop. The gas valve also snaps open with a single pop.
- 4
Removable oven bottom
If the oven bottom was installed wrong, expansion can cause an oil-canning noise. When cool, set the front toward the front frame, then lower the rear.
- 5
Fan noise
A sound that stops as the door opens belongs to the convection fan; one that carries on belongs to the cooling fan.
- 6
Cooling fan
It runs while the oven is in use and after, sometimes for long periods, to cool the cavity and electronic controls.
More about this symptom.
Which oven sounds does JennAir call normal?#
Ignitor clicking, a whoosh at ignition, popping from metal and porcelain, a single pop from the gas valve, and cooling or convection fan sound.
What if the oven bottom rattles?#
Some models have a removable oven bottom that can make an oil-canning noise if it is not installed correctly. When cool, set the front toward the front frame and lower the rear.
What details help the repair visit go faster?#
When a sound is new and harsh, such as grinding, scraping or rattling, or any sound comes with a gas smell. If there is a gas smell, go outside and ring the gas company first.
Systems a technician may investigate.
The symptom connects to these parts. What you observed cannot show that any single one has failed.
If the display adds a code.
No code tied directly to this topic.
No further researched dishwasher code is attached to this topic. Compare your exact message with your model manual and do not stand in a different code from the library.
See the research statusWhen observation becomes a service request.
Leave internal testing to a technician.
A new grinding, rattling or scraping sound.
Clicking continues while the burner stays off.
The cooling fan never stops after the oven cools.
A gas smell goes with any of the sounds.
Arrange a diagnosticSources and model boundaries.
The JennAir range oven noises: clicks, pops, whooshes, fans guidance rests on these references. Pick the manual that fits your model.
- Click or Clicking Noise in Oven - Range - Product Help | JennAir
- Pop or Popping Noise in Oven - Range - Product Help | JennAir
- Whoosh or Poof Noise in Oven - Range - Product Help | JennAir
- Fan Noise - Convection - Range - Product Help | JennAir
- Fan Noise - Non Convection - Range - Product Help | JennAir
Go by the instructions for your own model. See how we research these pages.
Why does my JennAir oven click during baking?
The ignitors click until a flame is detected. JennAir likens it to tapping a nail on glass and calls it normal, each 1 to 3 minutes through a cycle.
What is the whoosh when the oven lights?
Gas igniting at the bake or broil element. JennAir calls the whoosh normal, and it may recur each 1 to 3 minutes through a cycle.
Why does my oven pop or crack?
Heating and cooling of the porcelain and steel can cause popping. The gas valve also opens with a single pop, like a suction cup pulled off glass. Both are normal.
How can I tell the two fans apart?
Open the door. A noise that stops is the convection fan; one that carries on is the cooling fan. The convection fan runs through preheat and shuts off when the door opens.
Is the cooling fan running after I turn off the oven normal?
Yes. It runs while the oven is in use and after the cycle ends, sometimes for long stretches depending on temperatures, to cool the oven cavity and the electronics.
Code or symptom, part, service call
Tie the message to what comes next.
JennAir range not working at all
For a JennAir range that does nothing, JennAir lists the power first, then the lock, a delayed start and Demo Mode. On a new electric install, check the cord strain relief and terminal block wiring. After an outage, turn the breaker off for one minute.
Oven cooling fan
JennAir ovens run a cooling fan during and after use, and the pages say that humming is normal. An F8 E0 code is different: it says the fan speed is too low and points to an airflow restriction, the fan or its wiring. Check for blocked airflow, reset, then book.
Range repair
Schedule a diagnostic for your model, carried out at the appliance.
Find your metro
Office details, plus the access notes to pass along.
