Start from the symptom
JennAir range not working at all.
For a JennAir range that does nothing, JennAir lists the power first, then the lock, a delayed start and Demo Mode. On a new electric install, check the cord strain relief and terminal block wiring. After an outage, turn the breaker off for one minute.

Start with safe observations.
Turn the appliance off and unplug it before any check you can do yourself. Look out for pooled water and sharp edges. Never touch a wet plug or live area, take off service panels, or go past your model’s owner instructions.
- 1
Gas: main shut-off
On a gas range, verify the main gas valve is ON.
- 2
Check the breaker and fuse
Confirm no household fuse has blown or breaker tripped, and that the outlet works.
- 3
New electric install
Check the strain relief is tight, terminal wires are in the right places by color, and the hex nuts are tight.
- 4
After an outage
Turn the range breaker off for one minute, reset it, and monitor for one minute that the code does not return.
- 5
Check the control lock
The lock stops the range from being turned on or off by accident.
- 6
Look for a delayed start
The oven may be set so bake does not start until the set time. Cancel and restart the bake function.
- 7
Check Demo Mode and Energy Save
Demo Mode may show Try the Product, View Product Video or Showroom Mode. Energy Save blanks the display when idle.
More about this symptom.
What does JennAir check on a range that does nothing?#
Power (breaker, fuse and outlet), the control lock, a delayed start and Demo Mode. Gas ranges add the main gas shut-off. Electric ranges add the install wiring and power-outage checks.
What does a delayed start do?#
The oven is set for a bake function that will not start until the start time is reached. Cancel the control and restart the bake function.
How do I decide between another try and a visit?#
When the checks are cleared, or F9 or F9 E0 returns after the one-minute breaker reset. Wiring or the control board then needs testing.
Systems a technician may investigate.
The symptom connects to these parts. What you observed cannot show that any single one has failed.
If the display adds a code.
Electrical supply
F9 on a JennAir wall oven most often means the oven was wired wrongly at the home supply or the hard-wire connection, with L2 and N swapped as the example; a steam oven page gives only a reset. Call an electrician before using the oven again.
Electrical supply
F9 E0 on a JennAir professional-style range or wall oven points at the electrical supply: the pro-range pages ask for the outlet or supply to be checked, and the wall oven page names wrong wiring at the supply with L2 and N swapped as the example. Have an electrician check before further use.
When observation becomes a service request.
Leave internal testing to a technician.
F9 or F9 E0 returns after the breaker reset.
A new range does nothing and the terminal block checks are fine.
You smell gas.
The breaker trips as soon as the range is turned on.
Arrange a diagnosticSources and model boundaries.
The JennAir range not working at all guidance rests on these references. Pick the manual that fits your model.
- Nothing is Working - Electric Range - Product Help | JennAir
- Nothing is Working - Gas Range - Product Help | JennAir
Go by the instructions for your own model. See how we research these pages.
Why is my new JennAir electric range dead?
JennAir asks you to check the power connection: strain relief tight against the cord, terminal wires in the correct places by color, and hex nuts on the terminal block posts tight. This is an installer's job.
Can a power outage cause an F9 code?
Yes. JennAir says that during an outage the control may read line noise as incorrect voltage and show F9 or F9 E0. Pressing keys before the 10 second power-up delay can do the same.
What is Demo Mode on a range?
A feature on some ovens that lets you explore options without turning on the heating elements. The display says Try the Product, View Product Video or Showroom Mode after power on.
Why is my display blank?
If the range is in Energy Save mode (select models), the display stays blank when not in use. Press and hold SETTINGS/CLOCK for 3 seconds to turn it off.
Is a dead gas range a gas problem?
Sometimes. Verify the main gas valve is ON. But a gas range also needs electricity for the controls, so check the breaker, the outlet and the lock. A gas smell means going outside and phoning the gas company.
Code or symptom, part, service call
Tie the message to what comes next.
JennAir oven F9 error code
F9 on a JennAir wall oven most often means the oven was wired wrongly at the home supply or the hard-wire connection, with L2 and N swapped as the example; a steam oven page gives only a reset. Call an electrician before using the oven again.
JennAir range not working at all
For a JennAir range that does nothing, JennAir lists the power first, then the lock, a delayed start and Demo Mode. On a new electric install, check the cord strain relief and terminal block wiring. After an outage, turn the breaker off for one minute.
Professional-style range Start button
The Start button on a JennAir professional-style range flashes white after two seconds, asking for a press once mode and temperature are chosen. If nothing happens for two minutes, a tone sounds and the range drops back to idle.
Range repair
Schedule a diagnostic for your model, carried out at the appliance.
Find your metro
Office details, plus the access notes to pass along.
