Read the whole display
Say how many tones you hear, which lights blink and what the knobs were set to.
Model-specific code library
One signal is decoded for the commercial-style range: blinking amber lights with three short tones and a longer one. A knob reset is the only step the pages give.
Blinking amber lights on a JennAir commercial-style range usually signal an error, announced by three short tones and one longer tone. Turn the Mode and Temp knobs to new positions, then return Mode to Bake and Temp to Off. Lights that return mean service is needed.
Read the Blinking amber lights checks1 researched range codes. Each model reads codes its own way, so go by your own manual.

One signal is decoded for the commercial-style range: blinking amber lights with three short tones and a longer one. A knob reset is the only step the pages give.
Two Product Help pages are read, PH 14139 and the earlier PH 13085. No code table is printed for these ranges.
Say how many tones you hear, which lights blink and what the knobs were set to.
If you smell gas, leave and call your gas supplier from outside. Do not light anything or touch a switch.
For a JennAir range that does nothing, JennAir lists the power first, then the lock, a delayed start and Demo Mode. On a new electric install, check the cord strain relief and terminal block wiring. After an outage, turn the breaker off for one minute.
Most oven sounds on a JennAir gas range are normal: ignitor clicks every 1 to 3 minutes, a pop as the gas valve opens, a whoosh when gas ignites, popping as metal heats, and cooling or convection fan sound. A fan that keeps running after the oven goes off is normal too.
Go by the instructions for your own model. See how we research these pages.
Two Product Help pages are read, PH 14139 and the earlier PH 13085. No code table is printed for these ranges.
Take a clear photo of the whole range display and of the model label. Add what the appliance was doing when the message came up, and do not borrow the explanation for a different appliance.
An old search phrase is no substitute for manufacturer evidence. When our range documents leave a message undecoded, we show the name only and send you toward help, with no part or cause attached.
Browse the manufacturer documents in this range library and hold the models on their covers up against your label. Another model needs instructions of its own.