What it means
After replacing the Freshflow air filter on a French-door JennAir refrigerator, you must reset its status: press and hold AIR FILTER for three seconds. The icons switch off, then the air filter icon comes back blue.
JennAir refrigerator Air Filter indicator / Filters
After replacing the Freshflow air filter on a French-door JennAir refrigerator, you must reset its status: press and hold AIR FILTER for three seconds. The icons switch off, then the air filter icon comes back blue.
Also shown as Air Filter indicator
After replacing the Freshflow air filter on a French-door JennAir refrigerator, you must reset its status: press and hold AIR FILTER for three seconds. The icons switch off, then the air filter icon comes back blue.
Fit the replacement filter before resetting.
The indicator will not reset.
Checks you have ticked / saved in this browser

Fit the replacement filter before resetting. Resetting without replacing only hides the reminder.

Press and hold the AIR FILTER button on the control panel. The filter icons turn off.

When the reset completes, the icon is blue again and the Replace Filter words are gone.

JennAir says the directions vary by model number, so confirm your panel layout.
Send the model and the checks you have already run, then begin your request from this page.
Book a visit
A simplified drawing, because layouts change with the model. Tap an outlined part to see a photo and the related check.

Component reference
Some JennAir refrigerators have a Freshflow air filter that reduces food odors.
Read the definitionJennAir lists four stages. Blue means GOOD. Yellow means order a replacement. Red with Replace Filter means replace it. Red with Replace Filter flashing means expired.
Read the supporting manualYes. The page notes that at any status, holding AIR FILTER for three seconds resets the status to Good and turns the icon off. Do it only after a real filter change.
Read the supporting manualPer the page it keeps pollutants out of the refrigerator while letting air pass through, using carbon-based material that reduces common food odors.
Read the supporting manualManufacturer document
JennAir Product Help (producthelp.jennair.com)
dateModified 2026-01-27; PH 14184 / PH 14184 (French-door refrigerator)
Applies to JennAir French-door refrigerators with a Freshflow air filter. Source: product page PH 14184, last modified 2026-01-27.
Per JennAir's French-door page, yellow means order a replacement. Blue means GOOD, red with Replace Filter means replace it, and red with Replace Filter flashing means expired.
The page says holding AIR FILTER for three seconds resets the status to Good at any stage. That only changes the indicator, so do it after a real filter change.
Control panels differ between model numbers. JennAir recommends checking your owner's manual for the exact reset on your refrigerator.
The page says it keeps pollutants out of the refrigerator while allowing air to pass through, using carbon-based material that reduces common food odors.
Only if holding AIR FILTER for three seconds after fitting a fresh filter does not return the icon to blue.
Code or symptom, part, service call
On a JennAir the interior lights turn themselves off after the door has been open 10 minutes. Close every door for 1 minute to reset. Then check the door switch, the wiring plug after a delivery, Sabbath mode and the bulb.
Some JennAir refrigerators have a Freshflow air filter that reduces food odors. A colored icon shows its status: blue is good, yellow means order a replacement, red means replace it, and flashing red means expired. After a change, hold AIR FILTER for 3 seconds to reset.
Schedule a diagnostic for your model, carried out at the appliance.
Office details, plus the access notes to pass along.