Inside the appliance
Drip tray and grounds container. In plain English.
The drip tray catches rinse and drain water and the grounds container holds spent pucks. JennAir says to empty the tray before its red float rises above the cup grid, and to empty the grounds whenever the tray comes out.

Where it fits.
Drip tray and grounds container in the appliance
Both sit in the lower compartment behind the front service door; the red float shows at the cup rest.
The picture shows the kind of component only. It cannot tell you which replacement suits your model.
What you notice when this system needs a look.
A Drip tray and grounds container concern may show up with a drop in performance or a code that keeps returning. Testing comes first, before anyone decides the component is to blame.

JennAir built-in coffee maker display messages
A display prompt halts brewing until you fix the condition: refill and seat the tank for FILL TANK, empty the grounds container, reseat the brewing unit, close the service door, or adjust a too-fine grind. DESCALE needs the descaling cycle. GENERAL ALARM means clean the inside.

JennAir built-in coffee maker weak, cold or slow coffee
JennAir ties most coffee problems to cold cups, grind fineness, spouts or scale. Cold coffee: pre-warm cups and run a rinse. Weak coffee: grind one click finer. Slow, drop-by-drop coffee: grind one click coarser, clear the spouts and descale.
Owner care, within the model instructions.
Turn the appliance off and unplug it before any check you can do yourself. Look out for pooled water and sharp edges. Never touch a wet plug or live area, take off service panels, or go past your model’s owner instructions.
- 1
Watch the red float
If it sticks up through the cup rest, empty the tray at once. Overflow can leak into cabinetry.
- 2
Pull both together
Open the service door and slide out the tray and grounds container.
- 3
Empty both
Always empty the grounds box when the tray is removed so the machine keeps its cycle count.
- 4
Wipe, dry, refit
Use a soft damp cloth, no scouring pads. Seat the container on the tray and push it in fully.
Cleaning or replacement?
Leave internal testing to a technician.
Book us if water appears under the machine with the tray emptied and the float moving freely.
Arrange a diagnosticSources and model boundaries.
The Drip tray and grounds container guidance rests on these references. Pick the manual that fits your model.
- Cleaning the Drip Tray and Grounds Container - Product Help | JennAir
- Messages Displayed on Built-In Coffee Maker - Product Help | JennAir
Go by the instructions for your own model. See how we research these pages.
What is the red float?
A mechanical indicator that rises when the tray is full.
Why empty the grounds with the tray?
JennAir says to, to maintain the machine’s internal cycle tracking.
What do INSERT GROUNDS CONTAINER and EMPTY GROUNDS CONTAINER mean?
The container is missing or misaligned, or it is full. Empty, clean and reseat it.
Can I use abrasive pads?
No. JennAir says not to use scouring pads.
Code or symptom, part, service call
Tie the message to what comes next.
JennAir built-in coffee maker display messages
A display prompt halts brewing until you fix the condition: refill and seat the tank for FILL TANK, empty the grounds container, reseat the brewing unit, close the service door, or adjust a too-fine grind. DESCALE needs the descaling cycle. GENERAL ALARM means clean the inside.
Coffee machine repair
Schedule a diagnostic for your model, carried out at the appliance.
Find your metro
Office details, plus the access notes to pass along.

