Start from the symptom

JennAir wine cooler wine cellar over temp alarm or HI, LO, E1, E2.

Over Temp sounds and flashes when a zone stays above its preset range for 10 minutes. The audio stops by itself when temperature returns to normal, and the light flashes until you press Reset Alarm. For HI, LO, E1 or E2, power the unit off for one minute and back on.

Last reviewed

Undercounter wine cooler with its glass door open, bottles on wood shelves, a red display reading 78 and a glowing red alarm light above
Experienced techniciansWarranty on our workmanshipOEM parts available on orderUpfront pricing, agreed before work

Start with safe observations.

Turn the appliance off and unplug it before any check you can do yourself. Look out for pooled water and sharp edges. Never touch a wet plug or live area, take off service panels, or go past your model’s owner instructions.

  1. 1

    Press Reset Alarm

    The indicator keeps flashing until the Reset Alarm touchpad is pressed, even after the sound stops.

  2. 2

    Know the 4 hour repeat

    If the over temperature is still present when you reset, the indicator reactivates every 4 hours until the cellar is below the preset range.

  3. 3

    Check the door

    Leave the door closed and check that it is not held open by a bottle or a rack.

  4. 4

    Cycle the power for HI, LO, E1 or E2

    Shut off the breaker or pull the plug for a minute. Restore power and watch the display for a minute to see whether the code returns.

  5. 5

    Verify cooling

    After the restart, check the cellar is cooling.

More about this symptom.

How does the Over Temp alert work?#

It sounds and flashes when a zone is above its preset range for 10 minutes. The sound stops once the temperature returns to normal, and Reset Alarm clears the light.

What do I do for E1, E2, HI or LO?#

Power the unit down for one minute at the breaker or plug, power it up, and watch the display for one minute. JennAir lists nothing else for these displays.

How long should I troubleshoot before arranging service?#

When the display or alarm comes back after the power cycle, or the cellar will not hold its temperature. JennAir's notes stop at the restart, so the next step is a diagnosis.

If the display adds a code.

No code tied directly to this topic.

No further researched dishwasher code is attached to this topic. Compare your exact message with your model manual and do not stand in a different code from the library.

See the research status

When observation becomes a service request.

Leave internal testing to a technician.

The code or Over Temp alarm returns after a power cycle.

E1 or E2 shows again within a minute.

The cellar stays warm for days.

The alarm repeats every 4 hours.

Arrange a diagnostic

Sources and model boundaries.

The JennAir wine cellar over temp alarm or HI, LO, E1, E2 guidance rests on these references. Pick the manual that fits your model.

  • Over Temp - Wine Cellar - Product Help | JennAir
  • HI or LO Error Code - Wine Cellar - Product Help | JennAir
  • E1 Error Code - Wine Cellar - Product Help | JennAir
  • E2 Error Code- Wine Cellar - Product Help | JennAir

Go by the instructions for your own model. See how we research these pages.

Here to help

Good questions.
Clear answers.

Talk to our team
What does Over Temp mean on a JennAir wine cellar?

The temperature in either zone rose above the preset range for 10 minutes. The cellar gives an audible and visual alert. The sound shuts off by itself once the temperature is back to normal.

Why does the light keep flashing after the sound stops?

Because the indicator stays on until you press Reset Alarm. If the cellar is still above range at that point, the light reactivates every 4 hours.

Do these controls always show Over Temp?

No. JennAir says the features will not appear unless the cellar is above its preset range and the alarm needs a reset.

How do I clear E1, E2, HI or LO?

Breaker off or plug out for a minute, then power back and a minute of watching. JennAir gives this same cycle for each of the four displays.

Is my wine at risk?

The alert is there to help prevent spoilage. If the alarm repeats or the cellar stays warm, move valuable bottles to a cool place and book a technician.

Let’s take care of it.

Something on the display?
Send us the details.