JennAir dishwasher F2E2 / Controls

JennAir dishwasher
error F2E2

Dishwasher / display reference

F2E2 sits in JennAir's main control communication group for dishwashers. Leave it unpowered for half a minute, restore power and run a quick cycle. If F2E2 returns, schedule service. On the Clean light it is two flashes, a pause, then two more.

Also shown as F2E2

Last reviewed

Dishwasher / display reference
Meaning
F2E2 sits in JennAir's main control communication group for dishwashers. Leave it unpowered for half a minute, restore power and run a quick cycle. If F2E2 returns, schedule service. On the Clean light it is two flashes, a pause, then two more.
Who handles it
Reset, then book
Related codes
Source
F2E2- Dishwasher - Product Help | JennAir

What JennAir dishwasher F2E2 means.

What it means

F2E2 sits in JennAir's main control communication group for dishwashers. Leave it unpowered for half a minute, restore power and run a quick cycle. If F2E2 returns, schedule service. On the Clean light it is two flashes, a pause, then two more.

What you can safely check

A latch left open can interrupt a start and cloud what you see.

When to call a technician

F2E2 returns after the power cycle.

Checks you have ticked / saved in this browser

Safe checks, in order.

0 of 4 checks done
  1. JennAir dishwasher F2E2: Open dishwasher door with its top-edge control strip, a row of flat buttons and small lit indicators above loaded racks.
    Illustration. Follow your model’s instructions.
    Before you begin

    Close the door fully

    A latch left open can interrupt a start and cloud what you see. Push until it clicks, then go on.

  2. Dishwashers in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Check 2

    Pull the plug or turn the breaker off

    Cut power at the outlet or at the home electrical panel. A hard-wired dishwasher needs the breaker, not the front panel buttons.

  3. The black glass control strip of a built-in wall oven above its stainless handle
    Illustration. Follow your model’s instructions.
    Check 3

    Time thirty seconds, then restore power

    Wait the full thirty seconds on a clock. Restore power and let the display settle before you touch any button.

  4. Over the shoulder view of a person holding a tablet with a blank checklist, a refrigerator behind.
    Illustration. Follow your model’s instructions.
    Check 4

    Start a quick cycle

    Pick the shortest program. If the display shows F2E2 or the Clean light starts two-then-two flashing again, stop and record it for the visit.

Still showing F2E2?

Send the model and the checks you have already run, then begin your request from this page.

Book a visit

The control and its wiring.

Conceptual dishwasher sectionKeypadControl boardMotor wiringHeater wiring1234
  1. 2Control board
  2. 3Motor wiring
  3. 4Heater wiring

A simplified drawing, because layouts change with the model. Tap an outlined part to see a photo and the related check.

A little more context.

What does F2E2 tell me about the dishwasher?

JennAir groups it with the main control communication errors. The control cannot exchange signals with the other part of the electronics it relies on. Neither a wire nor a board is named.

Read the supporting manual

Does the same code appear on other pages?

F1E2 carries the same words. Each has its own page because the codes differ, and the Clean light pattern for F2E2 is two flashes, a pause and two flashes, versus one flash then two for F1E2.

Read the supporting manual

When is service the right call?

Service is the page's answer when the code reappears after power returns. If F2E2 is back within the first cycle or two, do not keep cycling power. Book a visit instead.

Read the supporting manual

The manual behind the message.

Manufacturer document

F2E2- Dishwasher - Product Help | JennAir

JennAir Product Help (producthelp.jennair.com)

dateModified 2026-06-15; PH 12192 / PH 12192 (dishwasher)

JennAir dishwasher page PH 12192, last modified 2026-06-15.

Here to help

Good questions.
Clear answers.

Talk to our team
Can I reset F2E2 by pressing Cancel?

The page does not offer that. It prints only the power cycle for this code, so use that.

My dishwasher is under the kitchen island with no outlet access. How do I cut power?

Use the breaker that feeds it. Label the breaker if you are not sure which one it is, and switch it off for the full thirty seconds.

Is F2E2 more serious than F2E1?

JennAir does not rank them. F2E2 is a communication problem and F2E1 points to a key or the console. Both lead to a power cycle and then service if the code repeats.

Will opening the door clear F2E2?

JennAir's text does not claim that. Opening the door only pauses a cycle, and a code from the control will usually remain until the power is cycled.

What details should I give when booking?

What the display said, your model and whether the code came back after power returned. If the unit was recently installed or moved, mention that as well.

Let’s take care of it.

Something on the display?
Send us the details.