F9E1 on a JennAir dishwasher is listed as Long Drain, meaning the water is not leaving the tub. The page's checks run from the filter to the drain hose, the sink disposer knockout plug on a new installation, the air gap and suds. Cycle the power after the checks.
F9E1 on a JennAir dishwasher is listed as Long Drain, meaning the water is not leaving the tub. The page's checks run from the filter to the drain hose, the sink disposer knockout plug on a new installation, the air gap and suds. Cycle the power after the checks.
F9E1 on a JennAir dishwasher is listed as Long Drain, meaning the water is not leaving the tub. The page's checks run from the filter to the drain hose, the sink disposer knockout plug on a new installation, the air gap and suds. Cycle the power after the checks.
What you can safely check
Take out the filter and rinse away debris.
When to call a technician
F9E1 returns after the checks and a power cycle.
Checks you have ticked / saved in this browser
Safe checks, in order.
0 of 5 checks done
Illustration. Follow your model’s instructions.
Before you begin
Clean the filter
Take out the filter and rinse away debris.
Illustration. Follow your model’s instructions.
Check 2
Check the drain hose
The hose should not be kinked, pinched or clogged.
Illustration. Follow your model’s instructions.
Check 3
Check the disposer and air gap
If a sink disposer is connected, make sure it is clear and, on a new installation, that the knockout plug is gone. Look at the air gap too.
Illustration. Follow your model’s instructions.
Check 4
Consider suds
Excess suds can slow the drain.
Illustration. Follow your model’s instructions.
Check 5
Cycle the power
Turn off the breaker for the dishwasher, or pull its plug, for 30 seconds, then restore power.
Still showing F9E1?
Send the model and the checks you have already run, then begin your request from this page.