JennAir dishwasher F9E2 / Drain

JennAir dishwasher
error F9E2

Dishwasher / display reference

JennAir lists F9E2 as an error with the drain motor. Check that the garbage disposer knockout plug is removed on a new install, clear any clog, straighten a kinked drain hose, verify the hose routing, then cycle power. Schedule service if it returns.

Also shown as F9E2

Last reviewed

Dishwasher / display reference
Meaning
JennAir lists F9E2 as an error with the drain motor. Check that the garbage disposer knockout plug is removed on a new install, clear any clog, straighten a kinked drain hose, verify the hose routing, then cycle power. Schedule service if it returns.
Who handles it
Reset, then book
Related codes
Source
F9E2 - Dishwasher - Product Help | JennAir

What JennAir dishwasher F9E2 means.

What it means

JennAir lists F9E2 as an error with the drain motor. Check that the garbage disposer knockout plug is removed on a new install, clear any clog, straighten a kinked drain hose, verify the hose routing, then cycle power. Schedule service if it returns.

What you can safely check

If the dishwasher drains into a garbage disposer, the knockout plug on the disposer inlet must have been removed.

When to call a technician

F9E2 returns, or the tub stays full.

Checks you have ticked / saved in this browser

Safe checks, in order.

0 of 4 checks done
  1. JennAir dishwasher F9E2: Dishwashers in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Before you begin

    Confirm the knockout plug is out on a new install

    If the dishwasher drains into a garbage disposer, the knockout plug on the disposer inlet must have been removed. This check applies to new installations only.

  2. The black glass control strip of a built-in wall oven above its stainless handle
    Illustration. Follow your model’s instructions.
    Check 2

    Clear the disposer and the drain

    Run the disposer clear and look for a clog in the drain line. Do not put your hand in a disposer.

  3. Over the shoulder view of a person holding a tablet with a blank checklist, a refrigerator behind.
    Illustration. Follow your model’s instructions.
    Check 3

    Straighten the drain hose

    A kinked or clogged hose can cause poor drainage or none. Check that it is routed on the correct side and inside the frame, as the page says for new installations.

  4. A technician reading a built-in oven display
    Illustration. Follow your model’s instructions.
    Check 4

    Cycle power

    Cut power for thirty seconds, then restore it. If F9E2 returns, book a visit.

Still showing F9E2?

Send the model and the checks you have already run, then begin your request from this page.

Book a visit

The water-out path.

Conceptual dishwasher sectionFiltersSumpDrain pumpDrain hoseSink connection12345
  1. 1Filters
  2. 2Sump
  3. 4Drain hose
  4. 5Sink connection

A simplified drawing, because layouts change with the model. Tap an outlined part to see a photo and the related check.

Parts behind the message.

Corrugated gray drain hose looped up to a cabinet bracket beside a garbage disposer under a sink.

Component reference

Dishwasher drain motor and hose

JennAir F9E1 is "Long Drain" and F9E2 is "Drain motor error".

Read the definition

A little more context.

What does the drain motor do?

It runs the pump that pushes water out through the drain hose. JennAir lists a drain motor error as the cause of F9E2, and the first checks concern what the motor pushes against.

Read the supporting manual

Why are installation checks on this page?

The page repeats the knockout plug, the hose routing and the frame position for new installations. A drain restricted at the install stage looks like a motor error to the control.

Read the supporting manual

How is F9E2 different from F9E1?

F9E1 is a long drain, with filter, hose, disposer and air gap checks. F9E2 reports the motor. Both lead to the drain line, so work through the same hose and disposer checks in either case.

Read the supporting manual

The manual behind the message.

Manufacturer document

F9E2 - Dishwasher - Product Help | JennAir

JennAir Product Help (producthelp.jennair.com)

dateModified 2026-06-15; PH 12204 / PH 12204 (dishwasher)

JennAir dishwasher page PH 12204, last modified 2026-06-15.

Here to help

Good questions.
Clear answers.

Talk to our team
Must the dishwasher come out of its cabinet to check the hose?

Only if the hose is not visible under the sink. If pulling it out would strain the water or power connections, leave it to a technician.

Can a garbage disposer cause F9E2?

The page lists a disposer clog and the knockout plug among the checks.

Is standing water a danger?

Water in the tub is not a shock hazard if the power is off. Remove the plug or breaker first.

Does a reset help if the hose is kinked?

No. Fix the kink first, then reset.

What details help the technician?

Whether the unit drains into a disposer or a sink tailpiece, the install date and the model number.

Let’s take care of it.

Something on the display?
Send us the details.