FAE5, also written F10E5, lists a diverter leak on JennAir's dishwasher page. Check under the dishwasher for leaks, make sure the water connections are secure, press Cancel twice, and try a new cycle. If the error returns, schedule service.
FAE5, also written F10E5, lists a diverter leak on JennAir's dishwasher page. Check under the dishwasher for leaks, make sure the water connections are secure, press Cancel twice, and try a new cycle. If the error returns, schedule service.
FAE5 or F10E5 - Dishwasher - Product Help | JennAir
What JennAir dishwasher FAE5 means.
What it means
FAE5, also written F10E5, lists a diverter leak on JennAir's dishwasher page. Check under the dishwasher for leaks, make sure the water connections are secure, press Cancel twice, and try a new cycle. If the error returns, schedule service.
What you can safely check
Check the floor beneath and beside the machine for puddles.
When to call a technician
FAE5 returns, or you find water around the dishwasher.
Checks you have ticked / saved in this browser
Safe checks, in order.
0 of 4 checks done
Illustration. Follow your model’s instructions.
Before you begin
Check for water first
Check the floor beneath and beside the machine for puddles. If you find water, shut off the supply and switch off power before doing anything else.
Illustration. Follow your model’s instructions.
Check 2
Check the water connections
Make sure all connections are secure. Hand-tight checks only; do not force fittings.
Illustration. Follow your model’s instructions.
Check 3
Press Cancel twice
JennAir prints this step. It clears the code on the control.
Illustration. Follow your model’s instructions.
Check 4
Start a new cycle
Start a quick wash. Keep an eye out for the code and for water collecting at the base. If FAE5 returns, book a visit.
Still showing FAE5?
Send the model and the checks you have already run, then begin your request from this page.
JennAir words the cause as a diverter leak. The diverter valve directs wash water to the spray arms, so a leak means water escaping where it should be sent.
Check the floor under and beside the dishwasher and the area around the water connections. JennAir asks you to make sure all water connections are secure.
Is pressing Cancel twice a reset?
It is the step JennAir prints before starting a new cycle after a FAE5. It clears the code from the control; it does not cure a leak.
Is a small leak acceptable while I wait?
We advise against it. A leak under the machine can damage cabinetry and floors, and a repeat of the code points to a technician.
Is FAE5 the same as F10E5?
Yes, and the flash pattern is ten flashes, a pause and five flashes. JennAir writes the code both ways.
How is a diverter leak different from a diverter error?
FAE4 reports a diverter valve error and asks for a power cycle. FAE5 reports a leak and asks you to check connections and press Cancel twice.