JennAir dishwasher FCE1 / Dishwasher

JennAir dishwasher
error FCE1

JennAir's dishwasher pages does not print FCE1. It lists 19 codes and 7 flash patterns instead. Recount the flashes, cycle the power for 30 seconds and arrange a visit if the code reappears.

Meaning not found in the manuals we checked

Codes covered here: FCE112-1

Last reviewed

FCE1
FCE1Dishwasher
Manual evidence

What the manual says about JennAir dishwasher FCE1.

Manual evidence

We read the JennAir Product Help dishwasher pages for every printed code (PH 12175 to 12206 and 14216 to 14219), the Dishwasher Error Codes - Reading page (PH 14220, 2026-08-31) and the flash pattern pages. They list 19 codes plus seven flash patterns, and none prints FCE1. A search of 1,218 cached Product Help pages for the string found nothing. They do print the reading rule: the first set of flashes is the F number, the second set the E number. JennAir's lists have no code with a C as the F part. Old pages wrote this one as 12-1, which JennAir does not print either.

Safe first steps.

  1. 1

    Recount the flashes

    Count the first burst of fast Clean light flashes as F, wait through the pause of one to two seconds, then count the second burst as E. Ten flashes is the A in FAE4 or FAE5.

  2. 2

    Compare with the printed list

    F1E1, F1E2, F2E1, F2E2, F3E2, F4E2, F4E3, F6E1, F6E3, F6E4, F7E2, F8E2, F8E4, F8E5, F9E1, F9E2, FAE4, FAE5 and H2O are printed. A near match may be a miscount.

  3. 3

    Cycle the power

    Turn off the breaker for the dishwasher, or pull its plug, for 30 seconds, then restore power.

  4. 4

    Check drain, water supply and suds

    Clear the filter, look at the drain hose and the water supply, and think about whether extra soap went in.

Jot these down before you call.

Dishwashers in a thoughtfully designed home
  • Model and serial number
  • Full display text
  • When the message appears
  • Checks you have run

When to call.

The code returns after the power cycle and the checks.

There is water around the dishwasher, or it refuses to start.

Book a visit(844) 940-0429

The documents we checked.

Source 1

Dishwasher Error Codes - Reading - Product Help | JennAir

JennAir Product Help (producthelp.jennair.com) / dateModified 2026-08-31; PH 14220 / PH 14220 (dishwasher)

Source 2

Clean Light Flashing - Dishwasher - Product Help | JennAir

JennAir Product Help (producthelp.jennair.com) / dateModified 2026-06-15; PH 12183 / PH 12183 (dishwasher)

Source 3

1 Pause 1 Pause - pause, repeat - Error Code - Dishwasher - Product Help | JennAir

JennAir Product Help (producthelp.jennair.com) / dateModified 2026-06-15; PH 12176 / PH 12176 (dishwasher)

Source 4

6 Pause 1 Pause - pause, repeat- Error Code - Dishwasher - Product Help | JennAir

JennAir Product Help (producthelp.jennair.com) / dateModified 2026-06-15; PH 12177 / PH 12177 (dishwasher)

Here to help

Good questions.
Clear answers.

Talk to our team
Does any JennAir document define FCE1 for the dishwasher?

No. JennAir's dishwasher pages list 19 codes and 7 flash patterns, and FCE1 is not among them.

What is the first step if FCE1 is showing?

Count the first burst of fast Clean light flashes as F, wait through the pause of one to two seconds, then count the second burst as E. Ten flashes is the A in FAE4 or FAE5. A near match to a printed code may be a miscount.

Is FCE1 the same as FCE2?

We cannot say. JennAir prints neither, so each has its own page and neither borrows from the other. Recount the flashes before assuming they match.

How do I know it is time to book a visit for FCE1?

Arrange a technician when FCE1 reappears after you switch off the dishwasher breaker or pull its plug for 30 seconds, or when water collects around the dishwasher or it refuses to start.

Let’s take care of it.

Something on the display?
Send us the details.