What it means
Ice Maker Off is a control, not an error. Touching ICE MAKER OFF turns the ice maker off, so the freezer stops making ice by design. If your column freezer is not making ice, check this first.
JennAir ice maker Ice Maker Off / Mode, not a failure
Ice Maker Off is a control, not an error. Touching ICE MAKER OFF turns the ice maker off, so the freezer stops making ice by design. If your column freezer is not making ice, check this first.
Also shown as Ice Maker Off
Ice Maker Off is a control, not an error. Touching ICE MAKER OFF turns the ice maker off, so the freezer stops making ice by design. If your column freezer is not making ice, check this first.
See whether ICE MAKER OFF is lit or selected.
Ice still does not form after the ice maker is switched on.
Checks you have ticked / saved in this browser

See whether ICE MAKER OFF is lit or selected.

The guide only states the off action, so check the display reacts.

Ice does not appear the moment the ice maker is switched on, so check the bin again later.

Max Ice raises cooling capacity to improve the ice making rate.
Send the model and the checks you have already run, then begin your request from this page.
Book a visit
A simplified drawing, because layouts change with the model. Tap an outlined part to see a photo and the related check.
A control: touch ICE MAKER OFF to turn the ice maker off.
Read the supporting manualThe guide states only the action: touch ICE MAKER OFF to turn the ice maker off. It gives no reason or schedule.
Read the supporting manualThe guide lists Max Ice, which raises freezer cooling capacity to improve the ice making rate.
Read the supporting manualIf the ice maker is on and no ice forms after a day.
Read the supporting manualManufacturer document
JennAir (use and care guide)
W11362247 Rev. C / p. 10
Scope: JennAir column freezer with ice maker, in use and care guide W11362247 Rev. C (freezer controls, item 4).
The ice maker may have been switched off at the ICE MAKER OFF control.
No. It controls only the ice maker. Showroom is the mode that stops cooling.
It increases freezer cooling capacity, improving the ice making rate.
The guide gives no time. If nothing forms after a day, book a visit.
Code or symptom, part, service call
Order Filter is a reminder, not a failure. It means it is nearly time to change the water filter, so order a replacement. The status light turns yellow and the display shows ORDER FILTER; press FILTER to see how much life remains.
When a freestanding ice maker goes quiet, look for a dirty or blocked bin sensor, a cracked or badly locked water filter, or a cleaning cycle that was cut short. Check those, level the unit and restart it. A service light that returns means a repair.
Schedule a diagnostic for your model, carried out at the appliance.
Office details, plus the access notes to pass along.