Model-specific code library

JennAir ice-maker error codes.

Six entries are decoded: Ice Maker Off, Service light, Order Filter, Replace Filter flashing, Replace Filter blinking and Clean light blinking. The Service light is the only one that points toward a technician.

Ice maker code finder

A blinking Clean light means the cleaning cycle is in progress, or it was interrupted. Press Clean to resume. When the Cleaning Complete light comes on, about 70 to 90 minutes later, the cycle is finished.

Read the Clean light blinking checks
Or choose

6 researched ice maker codes. Each model reads codes its own way, so go by your own manual.

Experienced techniciansWarranty on our workmanshipOEM parts available on orderUpfront pricing, agreed before work

Messages with a manual behind them.

Clean light blinking

Mode, not a failure

A blinking Clean light means the cleaning cycle is in progress, or it was interrupted. Press Clean to resume. When the Cleaning Complete light comes on, about 70 to 90 minutes later, the cycle is finished.

Maintenance due
Ice Maker Off

Mode, not a failure

Ice Maker Off is a control, not an error. Touching ICE MAKER OFF turns the ice maker off, so the freezer stops making ice by design. If your column freezer is not making ice, check this first.

Information only
Order Filter

Water supply and fill

Order Filter is a reminder, not a failure. It means it is nearly time to change the water filter, so order a replacement. The status light turns yellow and the display shows ORDER FILTER; press FILTER to see how much life remains.

Maintenance due
Replace Filter blinking

Water supply and fill

The Replace Filter icon flashes the whole time water is dispensing until you change the filter. After 14 days without a change it blinks seven times and three tones sound at the end of dispensing. Replace the filter, then hold FILTER RESET for three seconds.

Maintenance due
Replace Filter light flashing

Water supply and fill

A flashing Replace Filter light means the water filter needs attention. The light normally comes on after 9 months or 2,000 gallons. If it keeps flashing after a new filter, check the filter is locked, undamaged and has its O-rings, then restart the ice maker.

Maintenance due
Service light

Control board and communication

A lit Service light tells you the ice maker needs service. Power it down and up a single time with its on/off control; if the light is back afterward, a technician has to look at it.

Restart, then book

Start with the model boundary.

Ice makers in a thoughtfully designed home

JennAir ice maker lights split into six entries.

Six entries are decoded: Ice Maker Off, Service light, Order Filter, Replace Filter flashing, Replace Filter blinking and Clean light blinking. The Service light is the only one that points toward a technician.

We read the column freezer, side-by-side refrigerator and freestanding ice maker guides. Each light is tied to its own product.

Choose the next safe action.

Read the whole display

Say which product you have, which light shows and whether ice is still being made.

Respect the service boundary

Do not work inside the unit while the cleaning cycle runs. Book a visit when the Service light returns.

Documents checked for this library.

  • Column Refrigeration Use and Care Guide W11362247C
  • Service Light On- Freestanding Ice Maker - Product Help
  • Cleaning Light Blinking - Freestanding Ice Maker - Product Help
  • Filter Light Blinking - Freestanding Ice Maker - Product Help
  • Side by Side Built-In Refrigerator Use and Care Guide W10779525B

Go by the instructions for your own model. See how we research these pages.

Here to help

Good questions.
Clear answers.

Talk to our team
Are these ice-maker meanings universal?

We read the column freezer, side-by-side refrigerator and freestanding ice maker guides. Each light is tied to its own product.

What should I include when I report a ice-maker code?

Take a clear photo of the whole ice-maker display and of the model label. Add what the appliance was doing when the message came up, and do not borrow the explanation for a different appliance.

Why is a ice-maker code shown without any explanation?

An old search phrase is no substitute for manufacturer evidence. When our ice-maker documents leave a message undecoded, we show the name only and send you toward help, with no part or cause attached.

Where do I verify which ice-maker models a document applies to?

Browse the manufacturer documents in this ice-maker library and hold the models on their covers up against your label. Another model needs instructions of its own.

Let’s take care of it.

Something on the display?
Send us the details.