JennAir oven 1c7c / Oven control

JennAir oven
error 1c7c

Oven / display reference1c7c

1c7c means JennAir suspects the oven's control board or the wiring serving it. A repeat means it needs a technician. The first step is a sixty-second power reset at the breaker panel; call for service if it returns.

Also shown as 1c7c

Last reviewed

Oven / display reference1c7c
Meaning
1c7c means JennAir suspects the oven's control board or the wiring serving it. A repeat means it needs a technician. The first step is a sixty-second power reset at the breaker panel; call for service if it returns.
Who handles it
Reset, then book
Related codes
Source
1c7c - Error Code - Range - Product Help | JennAir

What JennAir oven 1c7c means.

What it means

1c7c means JennAir suspects the oven's control board or the wiring serving it. A repeat means it needs a technician. The first step is a sixty-second power reset at the breaker panel; call for service if it returns.

What you can safely check

If it was running, let the cavity and racks cool.

When to call a technician

1c7c comes back after the one-minute breaker reset.

Checks you have ticked / saved in this browser

Safe checks, in order.

0 of 4 checks done
  1. JennAir oven 1c7c: Wall oven with its control panel removed, green control board with relays and wire connectors exposed, the power cord and plug lying unplugged on the floor
    Illustration. Follow your model’s instructions.
    Before you begin

    Let the oven cool first

    If it was running, let the cavity and racks cool. The reset is done at the breaker panel, not inside the oven.

  2. Ranges & ovens in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Check 2

    Reset at the breaker

    Find the oven's circuit breaker, leave it off for sixty seconds, flip it on, and keep an eye on the display for a minute.

  3. The black glass control strip of a built-in wall oven above its stainless handle
    Illustration. Follow your model’s instructions.
    Check 3

    Note when it appeared

    Write down what the oven was doing: preheating, baking, idle, or just after a power flicker. A control problem can be timing-dependent.

  4. Over the shoulder view of a person holding a tablet with a blank checklist, a refrigerator behind.
    Illustration. Follow your model’s instructions.
    Check 4

    Mention recent work

    If the oven was installed, moved or serviced lately, tell the technician. The page lists wiring next to the control, so recent connection work matters.

Still showing 1c7c?

Send the model and the checks you have already run, then begin your request from this page.

Book a visit

The touch panel and control.

Conceptual Range / oven sectionKeypad / touch panelControl boardElement wiring123
  1. 3Element wiring

A simplified drawing, because layouts change with the model. Tap an outlined part to see a photo and the related check.

Parts behind the message.

Green circuit board with a ribbon cable and a loose black relay on a dark counter.

Component reference

Oven electronic control

The electronic control is the board that manages the oven functions.

Read the definition

A little more context.

Which part does JennAir name for 1c7c?

JennAir's range (PH 12893) and wall-oven (PH 13267) pages list the oven's control board or the wiring serving it as the possible problem. It does not say which part is responsible, and it names no repair.

Read the supporting manual

What can I do at home before booking?

Let the oven cool, then run the sixty-second power reset at the breaker panel and keep an eye on the display for a minute. Write down what the oven was doing when the code appeared, and mention any recent install or service work.

Read the supporting manual

1c7c or 1c81: what separates them?

1c81 is the next row down and names the same suspects. Reading the two side by side, nothing in the help pages separates them, so a code that returns is the signal to call, whichever number it is.

Read the supporting manual

Is it safe to keep cooking?

If the display stays clear after the reset and the oven heats and times normally, short cooking is reasonable. If the code returns, stop and call for service. A control problem is not something to cook through.

Read the supporting manual

The manual behind the message.

Manufacturer document

1c7c - Error Code - Range - Product Help | JennAir

JennAir Product Help (producthelp.jennair.com)

dateModified 2024-08-16; PH 12893 / PH 12893 (range)

Manufacturer document

1c7c - Wall Oven - Product Help | JennAir

JennAir Product Help (producthelp.jennair.com)

dateModified 2024-11-08; PH 13267 / PH 13267 (wall oven)

Applies to: freestanding range and wall oven. Source: JennAir Product Help PH 12893, PH 13267. The pages print one cause line and the reset; everything else here is our guidance.

Here to help

Good questions.
Clear answers.

Talk to our team
What should I do first when 1c7c shows?

Let the oven cool, run the sixty-second power reset at the breaker panel and keep an eye on the display for a minute.

Is 1c7c a house wiring problem?

JennAir names the oven's own control and its wiring, not your home supply. A breaker that stays on is a good sign the supply is fine.

Does 1c7c mean I need a new control?

Not by itself. The page names it as a possible problem, and a technician has to test before any part is replaced.

Can a long bake run while 1c7c is possible?

Reset first. If the display stays clear for a minute, a short bake is a reasonable test. If the code returns, stop.

Let’s take care of it.

Something on the display?
Send us the details.