4d31 names the oven's control board or the wiring serving it, which makes it a control row sitting between the low-speed and high-speed fan rows. The first step is a sixty-second power reset at the breaker panel; call for service if it returns.
4d31 names the oven's control board or the wiring serving it, which makes it a control row sitting between the low-speed and high-speed fan rows. The first step is a sixty-second power reset at the breaker panel; call for service if it returns.
4d31 names the oven's control board or the wiring serving it, which makes it a control row sitting between the low-speed and high-speed fan rows. The first step is a sixty-second power reset at the breaker panel; call for service if it returns.
What you can safely check
If it was running, let the cavity and racks cool.
When to call a technician
4d31 comes back after the one-minute breaker reset.
Checks you have ticked / saved in this browser
Safe checks, in order.
0 of 4 checks done
Illustration. Follow your model’s instructions.
Before you begin
Let the oven cool first
If it was running, let the cavity and racks cool. The reset is done at the breaker panel, not inside the oven.
Illustration. Follow your model’s instructions.
Check 2
Reset at the breaker
Find the oven's circuit breaker, leave it off for sixty seconds, flip it on, and keep an eye on the display for a minute.
Illustration. Follow your model’s instructions.
Check 3
Note when it appeared
Write down what the oven was doing: preheating, baking, idle, or just after a power flicker. A control problem can be timing-dependent.
Illustration. Follow your model’s instructions.
Check 4
Mention recent work
If the oven was installed, moved or serviced lately, tell the technician. The page lists wiring next to the control, so recent connection work matters.
Still showing 4d31?
Send the model and the checks you have already run, then begin your request from this page.
JennAir's range (PH 12913) and wall-oven (PH 13287) pages list the oven's control board or the wiring serving it as the possible problem. It does not say which part is responsible, and it names no repair.
Let the oven cool, then run the sixty-second power reset at the breaker panel and keep an eye on the display for a minute. Write down what the oven was doing when the code appeared, and mention any recent install or service work.
If the display stays clear after the reset and the oven heats and times normally, short cooking is reasonable. If the code returns, stop and call for service. A control problem is not something to cook through.
Applies to: freestanding range and wall oven. Source: JennAir Product Help PH 12913, PH 13287. The pages print one cause line and the reset; everything else here is our guidance.