4d51 is the second door row in JennAir's 4d group, after 4d11 and 4d12. It lists the latch assembly and the switch on the door, or the wiring to them. The first step is a sixty-second power reset at the breaker panel; call for service if it returns.
4d51 is the second door row in JennAir's 4d group, after 4d11 and 4d12. It lists the latch assembly and the switch on the door, or the wiring to them. The first step is a sixty-second power reset at the breaker panel; call for service if it returns.
4d51 - Error Code - Range - Product Help | JennAir
What JennAir oven 4d51 means.
What it means
4d51 is the second door row in JennAir's 4d group, after 4d11 and 4d12. It lists the latch assembly and the switch on the door, or the wiring to them. The first step is a sixty-second power reset at the breaker panel; call for service if it returns.
What you can safely check
If it was running, let it cool.
When to call a technician
4d51 comes back after the one-minute breaker reset.
Checks you have ticked / saved in this browser
Safe checks, in order.
0 of 4 checks done
Illustration. Follow your model’s instructions.
Before you begin
Let the oven cool first
If it was running, let it cool. Do not force a latched door; the reset is at the breaker panel.
Illustration. Follow your model’s instructions.
Check 2
Look for what holds the door
Check that a rack, pan or foil is not keeping the door from closing fully. That is our check, not JennAir's.
Illustration. Follow your model’s instructions.
Check 3
Reset at the breaker
Find the oven's circuit breaker, leave it off for sixty seconds, flip it on, and keep an eye on the display for a minute.
Illustration. Follow your model’s instructions.
Check 4
Watch the door
After the reset, notice whether the door closes fully and whether the lock engages when it should. Tell the technician what you saw.
Still showing 4d51?
Send the model and the checks you have already run, then begin your request from this page.
JennAir's range (PH 12917) and wall-oven (PH 13291) pages list the latch assembly and the switch on the door, or the wiring to them as the possible problem. It does not say which part is responsible, and it names no repair.
Let the oven cool, make sure nothing keeps the door from closing, then run the sixty-second power reset at the breaker panel and keep an eye on the display for a minute. Do not pry a stuck door.
4d52 follows with the same suspects. After it, JennAir moves to the 9d series, which also names the door latch and switch, so 4d11, 4d12, 4d51, 4d52 and every 9d row are one door family spread over two prefixes.
If the reset clears it and the door closes and locks normally, ordinary cooking is reasonable. If the code returns, or the door will not close or open as it should, stop and call for service.
Applies to: freestanding range and wall oven. Source: JennAir Product Help PH 12917, PH 13291. The pages print one cause line and the reset; everything else here is our guidance.
Let the oven cool, make sure nothing blocks the door, then run the sixty-second power reset at the breaker panel and watch the display.
Can I force the door open?
JennAir does not address it, so do not pry the door. Let the oven cool and do the breaker reset first.
Does 4d51 mean the door is broken?
Not by itself. The page names the latch assembly and the switch on the door, together with the wiring to them as possible problems; a technician has to test them.
Is 4d51 a self-clean code?
The page does not mention self-clean. It lists the latch assembly, the door switch and the wiring only.