JennAir oven C82 / Cooktop message

JennAir oven
error C82

Oven / display referenceC82

C82 is the same JennAir cooktop warning as C81: a surface cooking area ran too hot and the range shut it down. Turn off the oven if it is on, give the cooktop five minutes, then try it again. Reset the breaker for a minute if C82 comes back.

Also shown as C82

Last reviewed

Oven / display referenceC82
Meaning
C82 is the same JennAir cooktop warning as C81: a surface cooking area ran too hot and the range shut it down. Turn off the oven if it is on, give the cooktop five minutes, then try it again. Reset the breaker for a minute if C82 comes back.
Who handles it
Owner checks first, then a technician
Related codes
Source
C81 - Range - Product Help | JennAir

What JennAir oven C82 means.

What it means

C82 is the same JennAir cooktop warning as C81: a surface cooking area ran too hot and the range shut it down. Turn off the oven if it is on, give the cooktop five minutes, then try it again. Reset the breaker for a minute if C82 comes back.

What you can safely check

A surface that tripped its shutoff is hot.

When to call a technician

C82 comes back after the cool-down.

Checks you have ticked / saved in this browser

Safe checks, in order.

0 of 4 checks done
  1. JennAir oven C82: Range with a glass cooktop and a front control panel showing a lit display between knobs, a steel pan sitting on a burner and the oven door below.
    Illustration. Follow your model’s instructions.
    Before you begin

    Power down the cooking area

    Turn all burners off and the oven too if it is running. A cooktop that tripped C82 is hot, so keep hands and cloths away.

  2. Ranges & ovens in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Check 2

    Give it five minutes

    Wait the five minutes JennAir prints, then turn the cooktop on and confirm it responds. If you are impatient, time it on your phone.

  3. The black glass control strip of a built-in wall oven above its stainless handle
    Illustration. Follow your model’s instructions.
    Check 3

    Reset at the breaker if C82 returns

    Switch the range's breaker off for one minute and on again, then watch the cooktop for a minute. Do not repeat this more than once.

  4. Over the shoulder view of a person holding a tablet with a blank checklist, a refrigerator behind.
    Illustration. Follow your model’s instructions.
    Check 4

    Look at what was cooking

    Think about whether an empty pan or a very hot setting preceded C82. That detail helps the technician and is our suggestion, not JennAir's.

Still showing C82?

Send the model and the checks you have already run, then begin your request from this page.

Book a visit

The touch panel and control.

Conceptual Range / oven sectionKeypad / touch panelControl boardElement wiring123
  1. 3Element wiring

A simplified drawing, because layouts change with the model. Tap an outlined part to see a photo and the related check.

A little more context.

Why is a JennAir range showing C82?

C82 reports an overheated cooking surface area and an automatic shutoff. It appears on the range page that also lists C81 and C83.

Read the supporting manual

How long should the cooktop rest after C82?

JennAir says wait five minutes for it to cool, then switch the cooktop back on and check operation.

Read the supporting manual

What if C82 comes back after the rest?

Turn the breaker off for one minute, back on, and watch the cooktop for a minute. Return of C82 after that points to a service visit.

Read the supporting manual

Can I use the burners while C82 is on screen?

Wait for it to clear first. The message means the safety shutoff acted, so keep cooking off that area until the screen is normal.

Read the supporting manual

The manual behind the message.

Manufacturer document

C81 - Range - Product Help | JennAir

JennAir Product Help (producthelp.jennair.com)

dateModified 2024-08-16; PH 13005 / PH 13005 (range)

Scope: JennAir ranges with a built-in cooktop. Read from the shared C81, C82 or C83 page, PH 13005.

Here to help

Good questions.
Clear answers.

Talk to our team
What causes C82 on a JennAir range?

JennAir says a surface cooking area overheated and the automatic shutoff was activated. The page names no failed part.

How is C82 different from C81 and C83?

On JennAir's page the three codes share one set of steps. Your display number is simply the one you write down for the technician.

Do I need to turn the oven off for C82?

Yes, if it is running. The page starts with turning the oven off before the five-minute wait.

When should I book a visit for C82?

If C82 returns after the cool-down and a one-minute breaker reset, or if the glass or controls look damaged.

Let’s take care of it.

Something on the display?
Send us the details.