JennAir oven Call Service / Control message

JennAir oven
error Call Service

Oven / display referenceCall Service

Call Service on a JennAir oven means the control detected an error. Press Cancel first. If the message stays, switch the breaker off for one minute, turn it back on, start a bake cycle and watch the oven for a minute. If it returns, book a technician.

Also shown as Call Service

Last reviewed

Oven / display referenceCall Service
Meaning
Call Service on a JennAir oven means the control detected an error. Press Cancel first. If the message stays, switch the breaker off for one minute, turn it back on, start a bake cycle and watch the oven for a minute. If it returns, book a technician.
Who handles it
Reset, then book
Source
Call Service - Product Help | JennAir

What JennAir oven Call Service means.

What it means

Call Service on a JennAir oven means the control detected an error. Press Cancel first. If the message stays, switch the breaker off for one minute, turn it back on, start a bake cycle and watch the oven for a minute. If it returns, book a technician.

What you can safely check

Let the cavity cool a little, then press the Cancel button or pad.

When to call a technician

Call Service returns after the breaker cycle.

Checks you have ticked / saved in this browser

Safe checks, in order.

0 of 4 checks done
  1. JennAir oven Call Service: Wall oven with its door open and a lit message on the display above, the meat probe receptacle visible on the cavity side wall.
    Illustration. Follow your model’s instructions.
    Before you begin

    Cool the oven, then press Cancel

    Let the cavity cool a little, then press the Cancel button or pad. JennAir lists this as the first step.

  2. Ranges & ovens in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Check 2

    Cycle the breaker

    If the words remain after Cancel, turn the oven's breaker off for one minute and on again.

  3. The black glass control strip of a built-in wall oven above its stainless handle
    Illustration. Follow your model’s instructions.
    Check 3

    Run a short bake

    JennAir asks you to start a bake cycle after power returns and watch for a minute. Keep the oven empty for this test.

  4. Over the shoulder view of a person holding a tablet with a blank checklist, a refrigerator behind.
    Illustration. Follow your model’s instructions.
    Check 4

    Write down any code with it

    Check whether a numeric or F code appeared before Call Service. That earlier code is the lead for a technician.

Still showing Call Service?

Send the model and the checks you have already run, then begin your request from this page.

Book a visit

The touch panel and control.

Conceptual Range / oven sectionKeypad / touch panelControl boardElement wiring123
  1. 3Element wiring

A simplified drawing, because layouts change with the model. Tap an outlined part to see a photo and the related check.

A little more context.

What does Call Service mean on my JennAir oven?

It means the control found an error and is asking you to reset it. The message itself names no part.

Read the supporting manual

What should I press first?

Press Cancel, as the range and wall oven pages both say. If the message clears and does not return, nothing more is required.

Read the supporting manual

How do I power-cycle the oven?

Breaker off for one minute, back on, start a bake cycle, and watch the oven for one minute.

Read the supporting manual

How is Call Service different from Press Cancel to Reset?

The wording differs but the two messages share steps and neither names a part. If both appear at different times, tell the technician.

Read the supporting manual

The manual behind the message.

Manufacturer document

Call Service - Product Help | JennAir

JennAir Product Help (producthelp.jennair.com)

dateModified 2024-11-07; PH 13128 / PH 13128 (range)

Manufacturer document

Call Service - Wall Oven - Product Help | JennAir

JennAir Product Help (producthelp.jennair.com)

dateModified 2024-11-08; PH 13250 / PH 13250 (wall oven)

Scope: JennAir range and wall oven control messages. Read from JennAir Product Help PH 13128 (range) and PH 13250 (wall oven).

Here to help

Good questions.
Clear answers.

Talk to our team
Does Call Service mean the oven is broken?

Not necessarily. It means an error was detected, and a cancel or power reset sometimes clears a one-off event.

What if Call Service comes back every day?

Then the reset is only hiding a repeating problem. Book a visit and note when it appears.

Do I have to start a bake cycle after resetting?

JennAir's range page asks for it, to confirm the control runs a cycle without the message returning.

Can I use the oven with Call Service showing?

Press Cancel and try. If it will not clear, do not cook until a technician looks at it.

Let’s take care of it.

Something on the display?
Send us the details.