JennAir oven Door in Microwave Display / Combination oven message

JennAir oven
error Door in Microwave Display

Oven / display referenceDoor in Microwave Display

Door in Microwave Display on a combination JennAir wall oven means the control is waiting for input from the door switches. Open and close the door firmly. If the message stays, switch the breaker off for one minute, turn it back on and watch the oven for a minute.

Also shown as Door in Microwave Display

Last reviewed

Oven / display referenceDoor in Microwave Display
Meaning
Door in Microwave Display on a combination JennAir wall oven means the control is waiting for input from the door switches. Open and close the door firmly. If the message stays, switch the breaker off for one minute, turn it back on and watch the oven for a minute.
Who handles it
Reset, then book
Source
Door in Microwave Display - Combination Wall Oven - Product Help | JennAir

What JennAir oven Door in Microwave Display means.

What it means

Door in Microwave Display on a combination JennAir wall oven means the control is waiting for input from the door switches. Open and close the door firmly. If the message stays, switch the breaker off for one minute, turn it back on and watch the oven for a minute.

What you can safely check

Look along the microwave door edge for anything caught in it, such as a towel or a dish handle.

When to call a technician

The message returns after closing the door and a breaker reset.

Checks you have ticked / saved in this browser

Safe checks, in order.

0 of 4 checks done
  1. JennAir oven Door in Microwave Display: Ranges & ovens in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Before you begin

    Check the door for obstructions

    Look along the microwave door edge for anything caught in it, such as a towel or a dish handle.

  2. The black glass control strip of a built-in wall oven above its stainless handle
    Illustration. Follow your model’s instructions.
    Check 2

    Open and fully close the door

    JennAir's first step is to open and close the door. Push until you feel it seat.

  3. Over the shoulder view of a person holding a tablet with a blank checklist, a refrigerator behind.
    Illustration. Follow your model’s instructions.
    Check 3

    Cycle the breaker

    If the message remains, breaker off for a minute, on, and a minute of watching.

  4. A technician reading a built-in oven display
    Illustration. Follow your model’s instructions.
    Check 4

    Test the microwave side

    After the reset, try a short microwave run to see the door switch respond. Stop if it does not.

Still showing Door in Microwave Display?

Send the model and the checks you have already run, then begin your request from this page.

Book a visit

The touch panel and control.

Conceptual Range / oven sectionKeypad / touch panelControl boardElement wiring123
  1. 3Element wiring

A simplified drawing, because layouts change with the model. Tap an outlined part to see a photo and the related check.

A little more context.

What does Door in Microwave Display mean?

The oven control is looking for a signal from the door switches before it will continue.

Read the supporting manual

Is it a latch code?

It is related to door latch codes such as F5, but JennAir names no part for this message.

Read the supporting manual

The manual behind the message.

Manufacturer document

Door in Microwave Display - Combination Wall Oven - Product Help | JennAir

JennAir Product Help (producthelp.jennair.com)

dateModified 2024-11-08; PH 13252 / PH 13252 (wall oven)

Scope: JennAir combination wall oven control messages. Read from JennAir Product Help PH 13252.

Here to help

Good questions.
Clear answers.

Talk to our team
Why does my combination oven show Door in Microwave?

The control is not getting the door switch signal it expects. Closing the door properly often fixes it.

Does it affect the main oven?

The page does not say. Test each cavity separately after the reset.

Do I need to unplug the oven?

JennAir says to switch the circuit breaker for one minute. Do not open any panels.

Is the message dangerous?

The page does not call it so. Avoid microwave use until the message clears.

Let’s take care of it.

Something on the display?
Send us the details.