What it means
F1-5 lists the control board, the touch panel (JennAir's user interface), or the wiring behind them, on JennAir ranges. The first step is a sixty-second power reset at the breaker panel; call for service if it returns.
JennAir oven F1-5 / User interface
F1-5 lists the control board, the touch panel (JennAir's user interface), or the wiring behind them, on JennAir ranges. The first step is a sixty-second power reset at the breaker panel; call for service if it returns.
Also shown as F1-5
F1-5 lists the control board, the touch panel (JennAir's user interface), or the wiring behind them, on JennAir ranges. The first step is a sixty-second power reset at the breaker panel; call for service if it returns.
If it was running, give the cavity and the glass time to cool.
F1-5 comes back after the one-minute breaker reset.
Checks you have ticked / saved in this browser

If it was running, give the cavity and the glass time to cool. The reset happens at the breaker panel, so there is no need to open anything.

Find the oven's circuit breaker, leave it off for sixty seconds, flip it on, and keep an eye on the display for a minute. JennAir prints no other owner step.

With the oven off and cool, wipe the glass with a damp cloth. Grease or moisture on a touch panel is our guess, not something JennAir names.

After the reset, try several keys and note which ones are slow or dead. The technician can use that.
Send the model and the checks you have already run, then begin your request from this page.
Book a visitA simplified drawing, because layouts change with the model. Tap an outlined part to see a photo and the related check.

Component reference
The electronic control is the board that manages the oven functions.
Read the definition
Component reference
The user interface is the keypad or touch panel you press.
Read the definitionJennAir's range (PH 12942) page list the control board, the touch panel (JennAir's user interface), or the wiring as the possible problem. It does not say which part is responsible, and it names no repair.
Read the supporting manualLet the oven cool, then run the sixty-second power reset at the breaker panel and keep an eye on the display for a minute. After that, wipe the glass with the oven off and try a few keys. The wipe is our idea; the page only gives the reset.
Read the supporting manualF1-7 follows and names only the oven's control board and its wiring. F1-5 is the earlier of the two rows that include the keypad, the other being F1-8.
Read the supporting manualIf the reset clears it and the keys respond normally, ordinary cooking is reasonable. If the code returns, stop using the oven and call for service. JennAir gives no further owner step.
Read the supporting manualManufacturer document
JennAir Product Help (producthelp.jennair.com)
dateModified 2024-08-16; PH 12942 / PH 12942 (range)
Applies to: freestanding range. Source: JennAir Product Help PH 12942. The pages print one cause line and the reset; everything else here is our guidance.
Let the oven cool, run the sixty-second power reset at the breaker panel and keep an eye on the display for a minute.
It might if grease or moisture is involved, but JennAir does not say so. Wipe it with the oven off and cool, then do the reset.
Yes. The reset is the only owner step on the page, so a code that returns needs a technician to test the panel, control and wiring.
The keypad is one of three suspects, along with the oven control and the wiring. JennAir does not rank them.
Code or symptom, part, service call
F1 lists the temperature sensor and the control, or the wiring between them on both JennAir ranges and wall ovens. The first step is a sixty-second power reset at the breaker panel; call for service if it returns.
JennAir says not to judge oven temperature with a thermometer, because the elements cycle and most thermometers react too slowly. Check preheat time, racks, pan spacing and foil first, then run the biscuit test before any calibration.
The electronic control is the board that manages the oven functions. JennAir names it in F1 E1, F3 and F4 codes, and as the shared suspect in many sensor and keypad codes. The help pages give one owner step, a one-minute power-down, and do not name a repair.
Schedule a diagnostic for your model, carried out at the appliance.
Office details, plus the access notes to pass along.