JennAir oven F1-8 / User interface

JennAir oven
error F1-8

Oven / display referenceF1-8

F1-8 lists the control board, the touch panel (JennAir's user interface), or the wiring behind them, on JennAir ranges. The first step is a sixty-second power reset at the breaker panel; call for service if it returns.

Also shown as F1-8

Last reviewed

Oven / display referenceF1-8
Meaning
F1-8 lists the control board, the touch panel (JennAir's user interface), or the wiring behind them, on JennAir ranges. The first step is a sixty-second power reset at the breaker panel; call for service if it returns.
Who handles it
Reset, then book
Related codes
Source
F1-8 - Error Code - Range - Product Help | JennAir

What JennAir oven F1-8 means.

What it means

F1-8 lists the control board, the touch panel (JennAir's user interface), or the wiring behind them, on JennAir ranges. The first step is a sixty-second power reset at the breaker panel; call for service if it returns.

What you can safely check

If it was running, give the cavity and the glass time to cool.

When to call a technician

F1-8 comes back after the one-minute breaker reset.

Checks you have ticked / saved in this browser

Safe checks, in order.

0 of 4 checks done
  1. JennAir oven F1-8: A fingertip touching the glass control screen of a wall oven with lit marks, and a baked casserole dish waiting on the counter.
    Illustration. Follow your model’s instructions.
    Before you begin

    Let the oven cool first

    If it was running, give the cavity and the glass time to cool. The reset happens at the breaker panel, so there is no need to open anything.

  2. Ranges & ovens in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Check 2

    Reset at the breaker

    Find the oven's circuit breaker, leave it off for sixty seconds, flip it on, and keep an eye on the display for a minute. JennAir prints no other owner step.

  3. The black glass control strip of a built-in wall oven above its stainless handle
    Illustration. Follow your model’s instructions.
    Check 3

    Wipe the panel, oven off

    With the oven off and cool, wipe the glass with a damp cloth. Grease or moisture on a touch panel is our guess, not something JennAir names.

  4. Over the shoulder view of a person holding a tablet with a blank checklist, a refrigerator behind.
    Illustration. Follow your model’s instructions.
    Check 4

    Press a few keys

    After the reset, try several keys and note which ones are slow or dead. The technician can use that.

Still showing F1-8?

Send the model and the checks you have already run, then begin your request from this page.

Book a visit

The touch panel and control.

Conceptual Range / oven sectionKeypad / touch panelControl boardElement wiring123
  1. 3Element wiring

A simplified drawing, because layouts change with the model. Tap an outlined part to see a photo and the related check.

Parts behind the message.

Green circuit board with a ribbon cable and a loose black relay on a dark counter.

Component reference

Oven electronic control

The electronic control is the board that manages the oven functions.

Read the definition
A hand with a gray cloth wiping beside a row of small touch keys on an oven control panel.

Component reference

Oven keypad and user interface

The user interface is the keypad or touch panel you press.

Read the definition

A little more context.

Which part does JennAir name for F1-8?

JennAir's range (PH 12944) page list the control board, the touch panel (JennAir's user interface), or the wiring as the possible problem. It does not say which part is responsible, and it names no repair.

Read the supporting manual

What can I do at home before booking?

Let the oven cool, then run the sixty-second power reset at the breaker panel and keep an eye on the display for a minute. After that, wipe the glass with the oven off and try a few keys. The wipe is our idea; the page only gives the reset.

Read the supporting manual

F1-8 or F1-9: what separates them?

F1-9 follows and drops the keypad, naming the oven's control board and its wiring only. F1-8 and F1-5 are the two keypad rows of the series.

Read the supporting manual

Is it safe to keep cooking?

If the reset clears it and the keys respond normally, ordinary cooking is reasonable. If the code returns, stop using the oven and call for service. JennAir gives no further owner step.

Read the supporting manual

The manual behind the message.

Manufacturer document

F1-8 - Error Code - Range - Product Help | JennAir

JennAir Product Help (producthelp.jennair.com)

dateModified 2024-08-16; PH 12944 / PH 12944 (range)

Applies to: freestanding range. Source: JennAir Product Help PH 12944. The pages print one cause line and the reset; everything else here is our guidance.

Here to help

Good questions.
Clear answers.

Talk to our team
What should I do first when F1-8 shows?

Let the oven cool, run the sixty-second power reset at the breaker panel and keep an eye on the display for a minute.

Will cleaning the panel clear F1-8?

It might if grease or moisture is involved, but JennAir does not say so. Wipe it with the oven off and cool, then do the reset.

Do I need to book if F1-8 comes back?

Yes. The reset is the only owner step on the page, so a code that returns needs a technician to test the panel, control and wiring.

Is F1-8 the same as F1-5?

The cause line is the same. JennAir gives each its own page without saying what separates them.

Let’s take care of it.

Something on the display?
Send us the details.