What it means
F1E9 on a JennAir freestanding range or wall oven names the appliance control board or its wiring, the same suspects as F1E7. Switch the breaker off for one minute, restore power and watch the oven for a minute.
JennAir oven F1E9 / Oven control
F1E9 on a JennAir freestanding range or wall oven names the appliance control board or its wiring, the same suspects as F1E7. Switch the breaker off for one minute, restore power and watch the oven for a minute.
Also shown as F1E9
F1E9 on a JennAir freestanding range or wall oven names the appliance control board or its wiring, the same suspects as F1E7. Switch the breaker off for one minute, restore power and watch the oven for a minute.
Take pans out only when it is safe, and leave the oven off while you reset.
F1E9 returns after the breaker reset.
Checks you have ticked / saved in this browser

Take pans out only when it is safe, and leave the oven off while you reset.

A full minute off, then back on.

Keep an eye on the display for one more minute.

Note the product type and whether F1E9 appeared at startup or mid-cycle.
Send the model and the checks you have already run, then begin your request from this page.
Book a visit
A simplified drawing, because layouts change with the model. Tap an outlined part to see a photo and the related check.

Component reference
The electronic control is the board that manages the oven functions.
Read the definitionJennAir lists the appliance control board or the associated wiring.
Read the supporting manualThe pages we read print F1E7 and F1E9 but no F1E8. We do not guess what a missing number would mean.
Read the supporting manualBreaker off for one minute, restore power, monitor the oven for a minute.
Read the supporting manualIf F1E9 returns, or if the oven will not heat after the reset.
Read the supporting manualManufacturer document
JennAir Product Help (producthelp.jennair.com)
dateModified 2024-08-16; PH 12957 / PH 12957 (range)
Manufacturer document
JennAir Product Help (producthelp.jennair.com)
dateModified 2024-11-08; PH 13322 / PH 13322 (wall oven)
Scope: freestanding range and wall oven. Read from JennAir Product Help PH 12957 (range) and PH 13322 (wall oven).
JennAir gives them identical wording, so there is no printed ranking.
Sometimes, which is why the page asks for one. A return means testing is needed.
Yes.
If the oven behaves after the reset. Stop at a repeat.
Code or symptom, part, service call
F1 lists the temperature sensor and the control, or the wiring between them on both JennAir ranges and wall ovens. The first step is a sixty-second power reset at the breaker panel; call for service if it returns.
JennAir says not to judge oven temperature with a thermometer, because the elements cycle and most thermometers react too slowly. Check preheat time, racks, pan spacing and foil first, then run the biscuit test before any calibration.
The electronic control is the board that manages the oven functions. JennAir names it in F1 E1, F3 and F4 codes, and as the shared suspect in many sensor and keypad codes. The help pages give one owner step, a one-minute power-down, and do not name a repair.
Schedule a diagnostic for your model, carried out at the appliance.
Office details, plus the access notes to pass along.