JennAir oven F2 / Temperature sensor

JennAir oven
error F2

Oven / display reference

F2 lists the temperature sensor and the control, or the wiring between them on JennAir ranges and wall ovens. On a steam oven the page gives only a reset and asks you to start a cycle afterward. The first step is a sixty-second power reset at the breaker panel; call for service if it returns.

Also shown as F2

Last reviewed

Oven / display reference
Meaning
F2 lists the temperature sensor and the control, or the wiring between them on JennAir ranges and wall ovens. On a steam oven the page gives only a reset and asks you to start a cycle afterward. The first step is a sixty-second power reset at the breaker panel; call for service if it returns.
Who handles it
Reset, then book
Related codes
Source
F2 - Error Code - Range - Product Help | JennAir

What JennAir oven F2 means.

What it means

F2 lists the temperature sensor and the control, or the wiring between them on JennAir ranges and wall ovens. On a steam oven the page gives only a reset and asks you to start a cycle afterward. The first step is a sixty-second power reset at the breaker panel; call for service if it returns.

What you can safely check

If it was running, let the cavity and racks cool before you touch anything.

When to call a technician

F2 comes back after the one-minute breaker reset.

Checks you have ticked / saved in this browser

Safe checks, in order.

0 of 4 checks done
  1. JennAir oven F2: Close view of the slim temperature sensor probe on the back wall of an empty wall oven with the door open, next to the convection fan grille.
    Illustration. Follow your model’s instructions.
    Before you begin

    Let the oven cool first

    If it was running, let the cavity and racks cool before you touch anything. The reset is at the breaker panel.

  2. Ranges & ovens in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Check 2

    Reset at the breaker

    Find the oven's circuit breaker, leave it off for sixty seconds, flip it on, and keep an eye on the display for a minute.

  3. The black glass control strip of a built-in wall oven above its stainless handle
    Illustration. Follow your model’s instructions.
    Check 3

    Check with a thermometer

    If the oven runs after the reset, put an oven thermometer on the middle rack and compare it with the set temperature. A big gap is useful to report. This is our check, not JennAir's.

  4. Over the shoulder view of a person holding a tablet with a blank checklist, a refrigerator behind.
    Illustration. Follow your model’s instructions.
    Check 4

    Leave the sensor alone

    Do not bend or pull any thin rod inside the cavity. It may be the sensor, and the page offers no owner fix for it.

Still showing F2?

Send the model and the checks you have already run, then begin your request from this page.

Book a visit

The oven temperature sensor.

Conceptual Range / oven sectionTemperature sensorWiringControl123
  1. 2Wiring

A simplified drawing, because layouts change with the model. Tap an outlined part to see a photo and the related check.

Parts behind the message.

Slim metal oven temperature probe with a mounting flange and a coiled lead with a plug on a steel counter.

Component reference

Oven temperature sensor

JennAir Product Help ties F1, F2 and several F3 codes to the oven temperature sensor, the control or the wiring between them.

Read the definition
Green circuit board with a ribbon cable and a loose black relay on a dark counter.

Component reference

Oven electronic control

The electronic control is the board that manages the oven functions.

Read the definition

A little more context.

Which part does JennAir name for F2?

JennAir's range (PH 12958) and wall-oven (PH 13324) pages list the temperature sensor and the control, or the wiring between them as the possible problem. The steam-oven page (PH 13439) names no cause and asks only for the reset and a started cycle. No page names a repair.

Read the supporting manual

What can I do at home before booking?

Let the oven cool, then run the sixty-second power reset at the breaker panel and keep an eye on the display for a minute. If it works afterward, an oven thermometer on the middle rack shows whether the real temperature tracks the setting.

Read the supporting manual

F2 or F2E0: what separates them?

F2E0 changes the list to the keypad, the control and the wiring. F2 is the sensor-side entry of the family; the F2 E rows from E0 to E6 are the keypad side.

Read the supporting manual

Is it safe to keep cooking?

If the reset clears it, short bakes are reasonable, but watch results. If the code returns, or baking runs hot or cold, stop and call for service.

Read the supporting manual

The manual behind the message.

Manufacturer document

F2 - Error Code - Range - Product Help | JennAir

JennAir Product Help (producthelp.jennair.com)

dateModified 2024-08-16; PH 12958 / PH 12958 (range)

Manufacturer document

F2 - Wall Oven - Product Help | JennAir

JennAir Product Help (producthelp.jennair.com)

dateModified 2024-11-08; PH 13324 / PH 13324 (wall oven)

Manufacturer document

F2 - Wall Oven - Product Help | JennAir

JennAir Product Help (producthelp.jennair.com)

dateModified 2024-11-08; PH 13439 / PH 13439 (steam oven)

Applies to: freestanding range and wall oven plus a steam-oven page that prints only a reset. Source: JennAir Product Help PH 12958, PH 13324, PH 13439. The pages print one cause line and the reset; everything else here is our guidance.

Here to help

Good questions.
Clear answers.

Talk to our team
What should I do first when F2 shows?

Let the oven cool, run the sixty-second power reset at the breaker panel and keep an eye on the display for a minute.

Is F2 the sensor or the control?

JennAir lists the temperature sensor, the control and the wiring together and does not rank them. Only a test at the oven can tell.

Can I test the sensor myself?

No. JennAir gives no owner test for it. A thermometer shows whether the oven is off, not why.

Does F2 mean something different on a steam oven?

The steam oven page (PH 13439) prints no cause. It asks for the breaker reset, then a cycle started to see whether the code returns.

Let’s take care of it.

Something on the display?
Send us the details.