What it means
F5 E1 points to the main oven door latch and its switch on a JennAir range, the door latch assembly on a wall oven, and a seating check on a professional-style range. Hang the door correctly, then power cycle.
JennAir oven F5E1 / Door latch and switch
F5 E1 points to the main oven door latch and its switch on a JennAir range, the door latch assembly on a wall oven, and a seating check on a professional-style range. Hang the door correctly, then power cycle.
Also shown as F5E1
F5 E1 points to the main oven door latch and its switch on a JennAir range, the door latch assembly on a wall oven, and a seating check on a professional-style range. Hang the door correctly, then power cycle.
Keep fingers out of the hinge slots.
F5 E1 returns after the door check and reset.
Checks you have ticked / saved in this browser

Keep fingers out of the hinge slots.

A visible notch or space means the door is not fully on its hinges.

Pro-range advice from the 2025 page.

Five minutes off on the 2025 page, a minute on the others.
Send the model and the checks you have already run, then begin your request from this page.
Book a visit
A simplified drawing, because layouts change with the model. Tap an outlined part to see a photo and the related check.

Component reference
The latch assembly and its door switch lock the oven door for self-clean and report that the door is closed.
Read the definitionIt is the lock that holds the door shut at self-clean temperatures. The switch tells the control whether it is engaged.
Read the supporting manualWall ovens say 'the door latch, the switch that reports it, or connecting wiring'. Pro ranges say check the main door's installation.
Read the supporting manualA range with a second small oven or a warming compartment has more than one door. The page picks the main one.
Read the supporting manualIf hanging the door correctly and a reset do not clear it.
Read the supporting manualManufacturer document
JennAir Product Help (producthelp.jennair.com)
dateModified 2025-10-01; PH 14150 / PH 14150 (professional-style range)
Manufacturer document
JennAir Product Help (producthelp.jennair.com)
dateModified 2024-11-05; PH 13097 / PH 13097 (professional-style range)
Manufacturer document
JennAir Product Help (producthelp.jennair.com)
dateModified 2024-08-16; PH 12975 / PH 12975 (range)
Manufacturer document
JennAir Product Help (producthelp.jennair.com)
dateModified 2024-11-08; PH 13359 / PH 13359 (wall oven)
PH 14150, 13097, 12975, 13359: F5E1, pro-range/range/wall-oven.
The ranges name the main oven door in E1 and the latch assembly in E0.
Not while it shows.
Yes on pro ranges; ask for help.
JennAir says nothing of the kind.
Code or symptom, part, service call
F5 points at the door latch assembly or its switches on a JennAir freestanding range or wall oven, and at nothing in particular on a steam oven, where the page is only a reset. Close the door fully, then drop the breaker for a single minute and restore it.
JennAir says not to judge oven temperature with a thermometer, because the elements cycle and most thermometers react too slowly. Check preheat time, racks, pan spacing and foil first, then run the biscuit test before any calibration.
The latch assembly and its door switch lock the oven door for self-clean and report that the door is closed. JennAir lists them for F5 codes and F7 E0, and for the locked-door and door-will-not-close pages. A bent latch arm is one check you can do yourself.
Schedule a diagnostic for your model, carried out at the appliance.
Office details, plus the access notes to pass along.