What it means
Plain F6 on a JennAir freestanding range or wall oven names the oven control or the wiring that serves it. Power the oven down at the breaker for about a minute, bring it back, and watch the display for another minute.
JennAir oven F6 / Oven control
Plain F6 on a JennAir freestanding range or wall oven names the oven control or the wiring that serves it. Power the oven down at the breaker for about a minute, bring it back, and watch the display for another minute.
Also shown as F6
Plain F6 on a JennAir freestanding range or wall oven names the oven control or the wiring that serves it. Power the oven down at the breaker for about a minute, bring it back, and watch the display for another minute.
A control reset mid-cook can spoil food and confuse timers.
F6 returns after the breaker reset.
Checks you have ticked / saved in this browser

A control reset mid-cook can spoil food and confuse timers.

Use the circuit marked for the oven, then switch it back on.

After a power break, a built-in may ask for the time before it will bake.

If a letter E and a digit follow, you need that code's page instead.
Send the model and the checks you have already run, then begin your request from this page.
Book a visit

A simplified drawing, because layouts change with the model. Tap an outlined part to see a photo and the related check.

Component reference
JennAir ranges and wall ovens with several cavities use an appliance manager that coordinates the oven controls.
Read the definitionIt is the main board behind the display. It reads your settings and switches the bake, broil and fan circuits, so a problem in it can show as a general F6.
Read the supporting manualJennAir's F6 pages for ranges and wall ovens are short: the control and its wiring, plus the standard breaker steps. The E-numbered pages are where appliance managers and panels appear.
Read the supporting manualF6 E codes name an appliance manager, a converter control, a user interface or a microwave manager. A plain F6 stays with the main control.
Read the supporting manualIf the reset clears it and a test bake behaves, yes. A second appearance in a week is a reason to book.
Read the supporting manualManufacturer document
JennAir Product Help (producthelp.jennair.com)
dateModified 2024-08-16; PH 12980 / PH 12980 (range)
Manufacturer document
JennAir Product Help (producthelp.jennair.com)
dateModified 2024-11-18; PH 13366 / PH 13366 (wall oven)
PH 12980, 13366: F6, range/wall-oven.
The printed line is the same: the oven control or wiring. The surrounding controls differ in design.
Clock and some preferences may return to defaults. Reset them as the display asks.
F1 pages mention the temperature sensor first. F6 sticks to the control.
No. It is live-wired and often model-specific.
Code or symptom, part, service call
F6 E0 asks for a reset on a professional-style range and a wall oven, and names the oven control, appliance manager or wiring on a freestanding range. Cycle power for the time your page gives.
JennAir says not to judge oven temperature with a thermometer, because the elements cycle and most thermometers react too slowly. Check preheat time, racks, pan spacing and foil first, then run the biscuit test before any calibration.
JennAir ranges and wall ovens with several cavities use an appliance manager that coordinates the oven controls. The F6 family names it, sometimes with the converter control or the user interface. The pages admit there are many possible reasons, then give one reset.
Schedule a diagnostic for your model, carried out at the appliance.
Office details, plus the access notes to pass along.