What it means
F7 E1 is a door switch on a JennAir freestanding range, a water boiler temperature sensor on a wall oven, and a reset only on a professional-style range. Match your product, then restart power.
JennAir oven F7E1 / Door latch and switch
F7 E1 is a door switch on a JennAir freestanding range, a water boiler temperature sensor on a wall oven, and a reset only on a professional-style range. Match your product, then restart power.
Also shown as F7E1
F7 E1 is a door switch on a JennAir freestanding range, a water boiler temperature sensor on a wall oven, and a reset only on a professional-style range. Match your product, then restart power.
Pro range: knob to OFF.
F7 E1 returns after the reset.
Checks you have ticked / saved in this browser

Pro range: knob to OFF.

Listen for the latch; the switch reports the door state.

Weak steam or long preheat helps a technician.

Restore and monitor.
Send the model and the checks you have already run, then begin your request from this page.
Book a visitA simplified drawing, because layouts change with the model. Tap an outlined part to see a photo and the related check.
The door switch or its wiring. The switch tells the control whether the door is closed.
Read the supporting manualThe water boiler temperature sensor or its wiring. A sensor like this tells the control how hot the water is, which matters on ovens that heat water.
Read the supporting manualOnly a reset: knob to OFF.
Read the supporting manualRestart power once and watch.
Read the supporting manualManufacturer document
JennAir Product Help (producthelp.jennair.com)
dateModified 2024-11-05; PH 13106 / PH 13106 (professional-style range)
Manufacturer document
JennAir Product Help (producthelp.jennair.com)
dateModified 2025-01-08; PH 12988 / PH 12988 (range)
Manufacturer document
JennAir Product Help (producthelp.jennair.com)
dateModified 2024-11-08; PH 13379 / PH 13379 (wall oven)
PH 13106, 12988, 13379: F7E1, pro-range/range/wall-oven.
No. The latch locks; the switch reports.
The page does not say steam.
The page offers no descaling advice.
Watch for a repeat.
Code or symptom, part, service call
JennAir prints no plain F7. Every F7 page carries an E digit, and the same digit names different parts on a range, a wall oven and a professional-style range. Find the E number on your display and choose the page for your product type.
JennAir says not to judge oven temperature with a thermometer, because the elements cycle and most thermometers react too slowly. Check preheat time, racks, pan spacing and foil first, then run the biscuit test before any calibration.
Schedule a diagnostic for your model, carried out at the appliance.
Office details, plus the access notes to pass along.