F8 E2 points at the oven cooling fan or its wiring. JennAir's range page words it as cooling fan speed too high. Cut power at the breaker for one minute, switch it back on and watch the display for a minute. If F8 E2 returns, book a visit.
F8 E2 points at the oven cooling fan or its wiring. JennAir's range page words it as cooling fan speed too high. Cut power at the breaker for one minute, switch it back on and watch the display for a minute. If F8 E2 returns, book a visit.
F8E2 Error Code - Commercial Range - Product Help | JennAir
What JennAir oven F8E2 means.
What it means
F8 E2 points at the oven cooling fan or its wiring. JennAir's range page words it as cooling fan speed too high. Cut power at the breaker for one minute, switch it back on and watch the display for a minute. If F8 E2 returns, book a visit.
What you can safely check
Turn off the circuit breaker or breakers that feed the oven and leave them off for one minute.
When to call a technician
F8 E2 comes back within the one-minute watch after the power reset, or on the next cycle.
Checks you have ticked / saved in this browser
Safe checks, in order.
0 of 5 checks done
Illustration. Follow your model’s instructions.
Before you begin
Power the oven down at the breaker
Turn off the circuit breaker or breakers that feed the oven and leave them off for one minute. [3][4]
Illustration. Follow your model’s instructions.
Check 2
Switch it back on and watch for a minute
Turn the breaker on and monitor the oven for one minute to see whether the code shows again, then check that the oven works. [3][4]
Illustration. Follow your model’s instructions.
Check 3
Professional-style range: knob first
JennAir's professional-style page says to turn the Temp knob to OFF to cancel the code and resume use, and to reset power only if the problem persists. [2]
Illustration. Follow your model’s instructions.
Check 4
Professional-style range: longer power cycle
The other professional-style page asks for the control to be disconnected for 5 minutes, by unplugging the range or turning off its breaker. [1]
Illustration. Follow your model’s instructions.
Check 5
Book a visit if it returns
The pages name the oven cooling fan and the wiring and give no owner repair for either. If the code repeats, book a technician and read out F8 E2.
Still showing F8E2?
Send the model and the checks you have already run, then begin your request from this page.
F8 E0 is the low side. The range page reads cooling fan speed too low, and the range and wall-oven F8 E0 pages add an airflow restriction to the list of possible problems.
Applies to JennAir ranges, wall ovens and professional-style ranges. Sources: Product Help PH 12991 (range), PH 13385 (wall oven), PH 14161 and PH 13110 (professional-style range); F8 E0 pages PH 12990 and PH 13383 for the comparison. The professional-style pages disagree on the reset time (see the FAQ).
Does F8 E2 mean the cooling fan is running too slowly?
No, it is the high side. JennAir's range page words F8 E2 as cooling fan speed too high and F8 E0 as speed too low. Both name the oven cooling fan or its wiring. [3][5]
Why does the F8 E0 page mention airflow and this one does not?
The F8 E0 range and wall-oven pages list an airflow restriction among the possible problems. The F8 E2 pages list only the oven cooling fan and the associated wiring. [3][4]
How long should I cut power on a professional-style range?
JennAir's two pages differ. One asks for 5 minutes disconnected; the other says to turn the Temp knob to OFF and, if that fails, switch the breaker off for one minute. [1][2]
Does the wall oven page say the fan is too fast?
No. The wall-oven page for F8 E2 says only that there may be a problem with the oven cooling fan or the associated wiring. The speed wording is on the range page. [3][4]
Can I keep baking while F8 E2 shows?
JennAir's pages do not say. They ask you to reset power and check that the oven works afterward. Do not rely on a fan that keeps throwing the code; book a visit if it repeats.