JennAir oven H / Cooktop message

JennAir oven
error H

Oven / display referenceH

An H in the heat setting window of a JennAir range means a cooktop surface area is still too hot to touch, even after you turn it off. Let the cooktop cool; if the H stays or flashes after it has cooled, reset the breaker for sixty seconds.

Also shown as H

Last reviewed

Oven / display referenceH
Meaning
An H in the heat setting window of a JennAir range means a cooktop surface area is still too hot to touch, even after you turn it off. Let the cooktop cool; if the H stays or flashes after it has cooled, reset the breaker for sixty seconds.
Who handles it
Information only
Source
Displaying an H - Range - Product Help | JennAir

What JennAir oven H means.

What it means

An H in the heat setting window of a JennAir range means a cooktop surface area is still too hot to touch, even after you turn it off. Let the cooktop cool; if the H stays or flashes after it has cooled, reset the breaker for sixty seconds.

What you can safely check

Do not touch a surface that shows H.

When to call a technician

H stays lit on a fully cold cooktop after the reset.

Checks you have ticked / saved in this browser

Safe checks, in order.

0 of 4 checks done
  1. JennAir oven H: Range with a glass cooktop and a front control panel showing a lit display between knobs, a steel pan sitting on a burner and the oven door below.
    Illustration. Follow your model’s instructions.
    Before you begin

    Keep hands and cloths away

    The H is a hot-surface warning. Do not wipe or rest anything on the glass.

  2. Ranges & ovens in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Check 2

    Let the cooktop cool

    The H clears itself once the area is cool enough.

  3. The black glass control strip of a built-in wall oven above its stainless handle
    Illustration. Follow your model’s instructions.
    Check 3

    Only then, cycle the breaker

    If H stays or flashes, switch off the breaker for a single minute and restore it.

  4. Over the shoulder view of a person holding a tablet with a blank checklist, a refrigerator behind.
    Illustration. Follow your model’s instructions.
    Check 4

    Check the cooktop works

    Turn on one element after the reset.

Still showing H?

Send the model and the checks you have already run, then begin your request from this page.

Book a visit

The touch panel and control.

Conceptual Range / oven sectionKeypad / touch panelControl boardElement wiring123
  1. 3Element wiring

A simplified drawing, because layouts change with the model. Tap an outlined part to see a photo and the related check.

A little more context.

What does the H mean?

JennAir says it shows in the heat setting window when any surface cooking area is too hot to touch, even with the areas turned off.

Read the supporting manual

What if H flashes?

JennAir says to let the cooktop cool, then reset power at the breaker for about a minute, restore it and verify the cooktop operates.

Read the supporting manual

The manual behind the message.

Manufacturer document

Displaying an H - Range - Product Help | JennAir

JennAir Product Help (producthelp.jennair.com)

dateModified 2024-08-16; PH 13006 / PH 13006 (range)

PH 13006: H, range.

Here to help

Good questions.
Clear answers.

Talk to our team
Is H the same as Hot Surface?

Same idea, different wording. JennAir's page covers the range display.

How long until H goes away?

It depends on how hot the surface was. JennAir gives no time.

Can I use other burners with H lit?

Yes, with care. Another zone may still be hot.

Is H an error code?

No, it is a status, unless it stays on a cold cooktop.

Let’s take care of it.

Something on the display?
Send us the details.