Manual evidence
The JennAir Product Help column freezer page for F3E1 (PH 2230) carries the line 'There is currently no troubleshooting for this error code'. It gives no meaning, cause or fix.
JennAir refrigerator F3E1 / Refrigerator
We found no printed meaning for F3E1 in JennAir's column refrigerator and freezer pages, which lists codes with no troubleshooting steps. Power the unit down at the breaker for a minute, restore power and arrange a visit if the code reappears.
Switch the breaker off or unplug the unit for one minute, as JennAir's flashing F page does, then restore power.
Feel the refrigerator and freezer sides for warming, and move food that is no longer cold.
Write down whether the code appeared on the refrigerator or the freezer side of the column.
JennAir publishes no steps for these codes, so a returning code is a job for a technician.

F3E1 comes back after the power-down.
One side of the column feels warm.
Source 1
JennAir Product Help (producthelp.jennair.com) / dateModified 2021-04-27; PH 2230 / PH 2230 (column freezer)
Source 2
JennAir Product Help (producthelp.jennair.com) / dateModified 2021-04-27; PH 9901 / PH 9901 (built-in refrigerator)
JennAir gives no meaning for F3E1. Its column page says there is no troubleshooting for the code.
Switch the breaker off or unplug the unit for one minute, as JennAir's flashing F page does, then restore power. Feel the refrigerator and freezer sides, move food that is no longer cold, and note which zone showed the code.
No. JennAir lists each code on its own page, and the same no-troubleshooting line says nothing about a shared cause. Check your display character by character.
Arrange a technician when F3E1 reappears after the power-down or one side of the column feels warm. JennAir publishes no steps for it, so a repeating code is a job for a visit.