Inside the appliance

Coffee maker pump. In plain English.

The pump in a JennAir built-in coffee maker forces water through the packed coffee. When the grind is too fine it cannot finish in time, and the display shows GROUND TOO FINE ADJUST MILL. The fix is a single click coarser on the grind knob, turned only while the grinder runs.

Last reviewed

Built-in coffee machine pulled out of a cabinet with its bean hopper lid open and a hand turning the grind dial.
Experienced techniciansWarranty on our workmanshipOEM parts available on orderUpfront pricing, agreed before work

Where it fits.

Coffee maker pump in the appliance

JennAir's pages give no word on where the pump sits.

The picture shows the kind of component only. It cannot tell you which replacement suits your model.

Owner care, within the model instructions.

Turn the appliance off and unplug it before any check you can do yourself. Look out for pooled water and sharp edges. Never touch a wet plug or live area, take off service panels, or go past your model’s owner instructions.

  1. 1

    Check the tank is seated

    JennAir's page starts here, because a loose tank can also slow flow.

  2. 2

    Adjust the grind while it runs

    Move the knob one click clockwise toward the coarser numbers, only while the grinder is running.

  3. 3

    Relieve pressure

    JennAir's message page suggests fitting the hot water spout and running a short burst of hot water, to ease pressure and clear airlocks.

  4. 4

    Use one scoop of pre-ground

    For pre-ground coffee, JennAir calls for a single level scoop of medium grind.

  5. 5

    Press OK

    JennAir says to press OK in response to the alarm to reset it.

Cleaning or replacement?

Leave internal testing to a technician.

The alert returns with a coarser grind and a seated tank.

Coffee still drips slowly with a coarse grind and a descaled machine.

Arrange a diagnostic

Sources and model boundaries.

The Coffee maker pump guidance rests on these references. Pick the manual that fits your model.

  • GROUND TOO FINE ADJUST MILL - Press OK - FILL TANK! - Error Code - Built-In Coffee Maker - Product Help | JennAir
  • Messages Displayed on Built-In Coffee Maker - Product Help | JennAir

Go by the instructions for your own model. See how we research these pages.

Here to help

Good questions.
Clear answers.

Talk to our team
What is the pump for?

JennAir's message page says it pushes water through the compacted coffee bed within a safety time limit.

What triggers the grind alert?

A grind so fine the water cannot get through in time. JennAir says the coffee then runs off too slowly.

Which way does the knob turn?

One click clockwise toward the coarser numbers, grinder running. The older page names number 7.

Should I descale?

JennAir's alert steps leave descaling out. Its troubleshooting page does list scale as a cause of slow flow.

Let’s take care of it.

Something on the display?
Send us the details.