Inside the appliance

Oven Wi-Fi module. In plain English.

The Wi-Fi module links a connected JennAir oven to your router. FC E1 to FC E3 mean the appliance could not connect; FC E4 and FC E5 name the antenna; FC E6 and FC E9 name the power module. A router restart is the first owner step; the oven itself still bakes.

Last reviewed

Small green circuit board with a thin antenna wire taped to a white router on a wooden shelf.
Experienced techniciansWarranty on our workmanshipOEM parts available on orderUpfront pricing, agreed before work

Where it fits.

Oven Wi-Fi module in the appliance

Inside the oven or range, on the control side. The antenna is wired to the module.

The picture shows the kind of component only. It cannot tell you which replacement suits your model.

Owner care, within the model instructions.

Turn the appliance off and unplug it before any check you can do yourself. Look out for pooled water and sharp edges. Never touch a wet plug or live area, take off service panels, or go past your model’s owner instructions.

  1. 1

    Test the router

    The FC E1 page asks whether another Wi-Fi device works near the oven and suggests restarting the router: power it off for two minutes, then the appliance for two minutes.

  2. 2

    Check signal strength

    If you do not see full bars at the oven, the page suggests moving the router or adding a range extender.

  3. 3

    Power the oven down

    Switch the breaker off for one minute and on again, then watch for a minute.

  4. 4

    Check the SAID entry

    FC E8 is a registration message. If the SAID number was entered wrongly, the oven shows a registration error and you retype it.

Cleaning or replacement?

Leave internal testing to a technician.

Book us if FC E4, FC E5, FC E6 or FC E9 stays after the reset.

Book us if the router and phone are fine and the oven still cannot join.

Book us if the Wi-Fi light stays off though the oven works normally.

Arrange a diagnostic

Sources and model boundaries.

The Oven Wi-Fi module guidance rests on these references. Pick the manual that fits your model.

  • FC E1 - Error Code - Wall Oven - Product Help | JennAir
  • FC E4 - Error Code - Wall Oven - Product Help | JennAir
  • FC E6 - Error Code - Wall Oven - Product Help | JennAir
  • FC E1 - Error Code - Range - Product Help | JennAir
  • FC E4 - Error Code - Range - Product Help | JennAir
  • FC E6 - Error Code - Range - Product Help | JennAir
  • FC E8 - Error Code - Range - Product Help | JennAir
  • FC E8 - Wall Oven - Product Help | JennAir

Go by the instructions for your own model. See how we research these pages.

Here to help

Good questions.
Clear answers.

Talk to our team
Does a Wi-Fi code stop the oven from cooking?

The pages treat FC as a connectivity problem. They do not say cooking is blocked. Use the oven normally and book if the code returns.

What do FC E4 and FC E5 point to?

The Wi-Fi antenna or its wiring. The oven cannot fix that by resetting the router, so the page lists the breaker reset only.

What is FC E6 or FC E9?

Both name the Wi-Fi power module and its wiring. A technician tests the module on the oven.

Will a new router solve it?

Only for FC E1 to FC E3, which describe connection timeout, weak signal or a failed router. Other FC codes describe parts inside the oven.

Let’s take care of it.

Something on the display?
Send us the details.