Inside the appliance
Professional-style range Start button. In plain English.
The Start button on a JennAir professional-style range flashes white after two seconds, asking for a press once mode and temperature are chosen. If nothing happens for two minutes, a tone sounds and the range drops back to idle.

Where it fits.
Professional-style range Start button in the appliance
The Start button is on the control panel beside the knobs.
The picture shows the kind of component only. It cannot tell you which replacement suits your model.
What you notice when this system needs a look.
A Professional-style range Start button concern may show up with a drop in performance or a code that keeps returning. Testing comes first, before anyone decides the component is to blame.

JennAir range not working at all
For a JennAir range that does nothing, JennAir lists the power first, then the lock, a delayed start and Demo Mode. On a new electric install, check the cord strain relief and terminal block wiring. After an outage, turn the breaker off for one minute.

JennAir range oven noises: clicks, pops, whooshes, fans
Most oven sounds on a JennAir gas range are normal: ignitor clicks every 1 to 3 minutes, a pop as the gas valve opens, a whoosh when gas ignites, popping as metal heats, and cooling or convection fan sound. A fan that keeps running after the oven goes off is normal too.
Owner care, within the model instructions.
Turn the appliance off and unplug it before any check you can do yourself. Look out for pooled water and sharp edges. Never touch a wet plug or live area, take off service panels, or go past your model’s owner instructions.
- 1
Press when it flashes
The flash is the cue to press Start after you pick a mode and temperature.
- 2
Mind the timeout
After 2 minutes with no action a tone sounds and the unit goes idle.
- 3
Quick blinks mean invalid
Pressing Start on an invalid knob combination makes the light blink fast with a tone.
- 4
Check the table
Choose a valid mode and temperature from the functions table in your manual.
Cleaning or replacement?
Leave internal testing to a technician.
Book us if Start does not light or respond with a valid setting.
Arrange a diagnosticSources and model boundaries.
The Professional-style range Start button guidance rests on these references. Pick the manual that fits your model.
- Start Button Blinking - Commerical Range - Product Help | JennAir
- Understanding Tones or Beeps - Commercial Range - Product Help | JennAir
Go by the instructions for your own model. See how we research these pages.
Why is Start flashing?
It asks for a press after you have chosen a mode and temperature.
How long before it times out?
About 2 minutes with no action.
What do fast blinks mean?
An invalid selection was made when Start was pressed.
Where is the valid list?
In the functions table in the owner’s manual.
Code or symptom, part, service call
Tie the message to what comes next.
JennAir range not working at all
For a JennAir range that does nothing, JennAir lists the power first, then the lock, a delayed start and Demo Mode. On a new electric install, check the cord strain relief and terminal block wiring. After an outage, turn the breaker off for one minute.
Range repair
Schedule a diagnostic for your model, carried out at the appliance.
Find your metro
Office details, plus the access notes to pass along.

