On this page
- Racks ship in the cavity, the warming drawer or the storage drawer. 1
- A standard 30-inch range typically has two; the spec sheet gives your count. 1
- Pull to the stop, raise the front edge, lift. 1
- A range that is not level can make racks hard to slide. 23
- Oversized bakeware or a rack not pushed in can stop the door closing. 5
Where are the oven racks in a new JennAir range?#
In one of three places, depending on the model: the oven cavity, the warming drawer or the storage drawer. JennAir's Locating Oven Racks page lists those three, so check all of them before you decide a rack was left out of the box. 1

How many racks does my range have?#
A standard 30-inch range typically comes with two oven racks, depending on the model. To find the number for yours, search your model number on JennAir's site, open the product information, choose Specifications and read the number under Oven Details. 1
Extra racks can be ordered through JennAir's genuine parts site. 1
Have your model number ready before you search.
How do I move a rack without damaging it?#
Pull it out to the stop position, raise the front edge and lift it out. JennAir's rack pages add three rules: position racks before turning on the oven, do not move racks with bakeware on them, and make sure the racks are level. 14
- 1
- 2
- 3
- 4
- 5

Why does my rack slide badly?#
JennAir's Hard to Slide Racks page names three suspects: a range that is not level, racks or channels with buildup, and racks that are not installed correctly. Check them in that order, because the first one is the quickest to test. 2
To check levelness, place a standard flat rack in the oven and set a level on it. Check the range side to side, then front to back. If the range is not level, the page says to pull it forward until the rear leveling leg is free of the anti-tip bracket, then follow the owner's manual to adjust the leveling legs. 23
The page also offers a smartphone tip: it links to instructions for using your phone as a level. 2

Does rack height really matter?#
JennAir's page says it does. Heat and air movement differ throughout the oven, so some cooking methods suit the top, the middle or the bottom better, and the page points to a video on rack placement for each. 1 The page itself gives no table of heights, so use your owner's manual for your recipe type and cavity.
That is why the rule about placing racks before turning on the oven matters. You are choosing where the food sits in the heat, and moving a hot rack mid-cook is awkward. 1
How do I clean racks that stick?#
Remove them from the cavity, wash with soap, water and a soft cloth or sponge, then dry thoroughly. JennAir says to check the rack channels on the cavity wall for buildup too, and that a light coat of vegetable oil helps a discolored rack that has become harder to slide. 2
Before you start, all controls must be off and the oven cool. Follow the label directions on any cleaning product. 24 For harder stains, the page says a steel wool pad can be used on the rack. 2
On the wall oven version of the page, the oil goes on the rack guides rather than the rack itself. 4 That page also says to always remove the oven racks before cleaning and before a self-clean cycle, and that a steel wool pad is an option for the racks. 4
The wall oven page repeats the same three rules for moving racks as the range page: pull to the stop, position before the oven is on, never with bakeware on the rack. 4 The racks in a wall oven are handled the same way as in a range.
What if the racks keep the door from closing?#
Check the racks are in fully, and check the bakeware. JennAir's page says to verify the racks are inserted correctly and pushed in fully, that a roll-out rack, if you have one, is in completely, and that the pan is not too big for the cavity. 5
Leave 2 inches of space around bakeware and the oven walls, because hot air must be able to circulate. 5 That spacing helps the cooking, too.
The same page explains how to take out a roll-out rack: slide the rack in completely so it is closed and engaged with the sliding shelf, lift the front of the rack and the shelf with two hands, push them slowly to the back wall until the front edge sits on the rack guide, then lift the back so both are level and pull them out. 5
For a door that still will not close, the oven door problem page has the other checks.
What if I want to check the rack count again later?#
The specification route on JennAir's site works at any time. Search the model number, open the product information, choose Specifications and read Oven Details. Keep a note of the count with the rating plate details, so a missing rack is easy to spot after a move or a clean. 1
When do the racks call for a technician?#
When the range cannot be leveled, when racks catch after cleaning in a level range, or when the door does not close with the racks seated and nothing oversized inside. Bring the model number from the rating plate. 25
The repairs we take on are listed on our oven service page.
Sources#
- Locating Oven Racks in New Range - Product Help | JennAirJennAir Product Help (producthelp.jennair.com) · dateModified 2025-04-11; PH 12342 · PH 12342
- Hard to Slide Rack(s) - Product Help | JennAirJennAir Product Help (producthelp.jennair.com) · dateModified 2025-04-11; PH 13073 · PH 13073
- Racks Not Level - Product Help | JennAirJennAir Product Help (producthelp.jennair.com) · dateModified 2025-04-11; PH 12735 · PH 12735
- Cleaning the Oven Racks - Wall Oven - Product Help | JennAirJennAir Product Help (producthelp.jennair.com) · dateModified 2025-04-10; PH 13157 · PH 13157
- How to Determine if the Rack is Keeping the Oven Door Open - Product Help | JennAirJennAir Product Help (producthelp.jennair.com) · dateModified 2025-10-16; PH 682 · PH 682


