JennAir oven F9 / Electrical supply

JennAir oven
error F9

Oven / display reference

F9 on a JennAir wall oven most often means the oven was wired wrongly at the home supply or the hard-wire connection, with L2 and N swapped as the example; a steam oven page gives only a reset. Call an electrician before using the oven again.

Also shown as F9

Last reviewed

Oven / display reference
Meaning
F9 on a JennAir wall oven most often means the oven was wired wrongly at the home supply or the hard-wire connection, with L2 and N swapped as the example; a steam oven page gives only a reset. Call an electrician before using the oven again.
Who handles it
Electrician first
Related codes
Source
F9 or F9 E0 - Wall Oven - Product Help | JennAir

What JennAir oven F9 means.

What it means

F9 on a JennAir wall oven most often means the oven was wired wrongly at the home supply or the hard-wire connection, with L2 and N swapped as the example; a steam oven page gives only a reset. Call an electrician before using the oven again.

What you can safely check

The supply and hard-wire connection carry household voltage.

When to call a technician

F9 appears on a newly installed oven or returns after the reset.

Checks you have ticked / saved in this browser

Safe checks, in order.

0 of 4 checks done
  1. JennAir oven F9: Ranges & ovens in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Before you begin

    Stop using the oven

    Wrong supply wiring can damage the control or create a shock risk. Take the oven's circuit down at the panel and leave it off if the oven is newly installed.

  2. The black glass control strip of a built-in wall oven above its stainless handle
    Illustration. Follow your model’s instructions.
    Check 2

    Call a qualified electrician

    JennAir says to have the supply and the hard-wire terminals checked, including that L2 and N are not swapped.

  3. Over the shoulder view of a person holding a tablet with a blank checklist, a refrigerator behind.
    Illustration. Follow your model’s instructions.
    Check 3

    Think about power-up habits

    Keys pressed during the first ten seconds after power returns can also show F9, F9 E0 or PF.

  4. A technician reading a built-in oven display
    Illustration. Follow your model’s instructions.
    Check 4

    Reset once the supply is confirmed

    A minute at the breaker, then a minute of watching.

Still showing F9?

Send the model and the checks you have already run, then begin your request from this page.

Book a visit

The touch panel and control.

Conceptual Range / oven sectionKeypad / touch panelControl boardElement wiring123
  1. 3Element wiring

A simplified drawing, because layouts change with the model. Tap an outlined part to see a photo and the related check.

A little more context.

What does the wall oven page actually say?

It says the code will most often point to incorrect wiring at the home electrical supply or at the hard-wire connection, with all terminals to be checked and L2 and N confirmed not swapped.

Read the supporting manual

Can it be something other than wiring?

Yes. After a power outage, line noise that the control reads as a wrong voltage can show F9, F9 E0 or PF. Pressing keys before the ten-second power-up delay ends can do the same.

Read the supporting manual

What does the steam oven page say?

Only a reset: the breaker off for sixty seconds, back on, start a cycle and monitor. It names no cause.

Read the supporting manual

Why should an electrician do the wiring check?

Supply terminals carry full line voltage. JennAir sends this check to a qualified electrician, and we agree: do not open the junction box yourself.

Read the supporting manual

The manual behind the message.

Manufacturer document

F9 or F9 E0 - Wall Oven - Product Help | JennAir

JennAir Product Help (producthelp.jennair.com)

dateModified 2025-11-13; PH 13389 / PH 13389 (wall oven)

Manufacturer document

F9 - Wall Oven - Product Help | JennAir

JennAir Product Help (producthelp.jennair.com)

dateModified 2024-11-08; PH 13443 / PH 13443 (steam oven)

PH 13389, 13443: F9, wall-oven/steam-oven.

Here to help

Good questions.
Clear answers.

Talk to our team
Is F9 the same as the range F9-1?

No. Range F9-1, -2 and -3 name the door latch. F9 on a wall oven is a supply message.

Can a new install show F9?

Yes. A recent install is the most likely time for wrong wiring to appear.

Will a reset clear a wiring error?

No. A reset helps with noise or key presses, not with swapped conductors.

Is F9 serious?

Treat it as serious until the supply is checked.

Let’s take care of it.

Something on the display?
Send us the details.