JennAir dishwasher F6E4 / Water

JennAir dishwasher
error F6E4

Dishwasher / display reference

F6E4 lists the water float switch as the potential cause. JennAir wants the dishwasher checked for level, then a half-minute power cycle. An unlevel tub can trip the overfill float switch.

Also shown as F6E4

Last reviewed

Dishwasher / display reference
Meaning
F6E4 lists the water float switch as the potential cause. JennAir wants the dishwasher checked for level, then a half-minute power cycle. An unlevel tub can trip the overfill float switch.
Who handles it
Owner checks first, then a technician
Related codes
Source
F6E4- Dishwasher - Product Help | JennAir

What JennAir dishwasher F6E4 means.

What it means

F6E4 lists the water float switch as the potential cause. JennAir wants the dishwasher checked for level, then a half-minute power cycle. An unlevel tub can trip the overfill float switch.

What you can safely check

Set a level on the door or the rack rail and check side to side and front to back.

When to call a technician

F6E4 returns on a level dishwasher.

Checks you have ticked / saved in this browser

Safe checks, in order.

0 of 4 checks done
  1. JennAir dishwasher F6E4: Dishwasher with its lower access panel off, showing the fill valve, float and drip tray, with the sink shut-off valve and an open breaker panel nearby.
    Illustration. Follow your model’s instructions.
    Before you begin

    Check that the dishwasher is level

    Set a level on the door or the rack rail and check side to side and front to back. Incorrect leveling can actuate the overfill switch, as the page notes.

  2. Dishwashers in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Check 2

    Look for a rocking cabinet

    If the dishwasher rocks when you press the top corners, the feet are not set. Leveling feet are a built-in adjustment, not a reason to remove the unit.

  3. The black glass control strip of a built-in wall oven above its stainless handle
    Illustration. Follow your model’s instructions.
    Check 3

    Cycle power

    Pull the plug or turn off the breaker for thirty seconds, then restore power.

  4. Over the shoulder view of a person holding a tablet with a blank checklist, a refrigerator behind.
    Illustration. Follow your model’s instructions.
    Check 4

    Run a short cycle

    Check that F6E4 stays away. If it returns on a level machine, book a visit.

Still showing F6E4?

Send the model and the checks you have already run, then begin your request from this page.

Book a visit

The water-in path.

Conceptual dishwasher sectionSupply valveInlet connectionDishwasher123
  1. 1Supply valve
  2. 3Dishwasher

A simplified drawing, because layouts change with the model. Tap an outlined part to see a photo and the related check.

Parts behind the message.

Plastic drip tray with a small float switch and red and black wire, pulled partway out from under a dishwasher.

Component reference

Float switch and drip tray

The float switch watches for too much water.

Read the definition

A little more context.

What does the float switch do?

The float switch senses when the water level in the tub gets too high. It guards against overfilling, and JennAir's page names it for F6E4.

Read the supporting manual

Why would leveling matter?

The page says incorrect leveling can actuate the overfill or floater switch and cause the error. A tub that leans may shift the float even with a normal water level.

Read the supporting manual

How is F6E4 different from F8E4?

F8E4 reports water detected in the drip tray and includes install checks. F6E4 is about the float switch and leveling. Both mention a float switch, so read the code carefully.

Read the supporting manual

The manual behind the message.

Manufacturer document

F6E4- Dishwasher - Product Help | JennAir

JennAir Product Help (producthelp.jennair.com)

dateModified 2026-06-15; PH 12197 / PH 12197 (dishwasher)

JennAir dishwasher page PH 12197, last modified 2026-06-15.

Here to help

Good questions.
Clear answers.

Talk to our team
Do I need special tools for leveling?

A small spirit level and an adjustable wrench or screwdriver for the feet are usually enough. Do not pull the dishwasher out if the connections are tight.

Can a new installation cause F6E4?

The page ties the error to leveling, which an installer sets. If it shows up soon after an install, say so when you book.

Is water leaking when F6E4 shows?

Not necessarily. Check the floor and the drip tray area anyway, and switch off power if you find water.

What if the dishwasher is level and the code stays?

Then the page offers nothing further. A technician is needed for the switch or its connections.

Can I wipe the float?

Not as a step from the page. The float sits inside the tub, and the page does not describe cleaning it.

Let’s take care of it.

Something on the display?
Send us the details.