JennAir dishwasher F8E4 / Water

JennAir dishwasher
error F8E4

Dishwasher / display reference

JennAir's reading page words F8E4 as Water Detected in Drip Tray. Turn off the water supply, press Cancel once to silence the tone, leave the door shut and do not turn the power off. The dishwasher drains and blocks operation. Then book a visit.

Also shown as F8E4

Last reviewed

Dishwasher / display reference
Meaning
JennAir's reading page words F8E4 as Water Detected in Drip Tray. Turn off the water supply, press Cancel once to silence the tone, leave the door shut and do not turn the power off. The dishwasher drains and blocks operation. Then book a visit.
Who handles it
Technician — close the water supply
Related codes
Source
Dishwasher Error Codes - Reading - Product Help | JennAir

What JennAir dishwasher F8E4 means.

What it means

JennAir's reading page words F8E4 as Water Detected in Drip Tray. Turn off the water supply, press Cancel once to silence the tone, leave the door shut and do not turn the power off. The dishwasher drains and blocks operation. Then book a visit.

What you can safely check

Keep clear of standing water around the dishwasher and its power supply.

When to call a technician

F8E4 returns after the code is cleared.

Checks you have ticked / saved in this browser

Safe checks, in order.

0 of 4 checks done
  1. JennAir dishwasher F8E4: Dishwasher with its lower access panel off, showing the fill valve, float and drip tray, with the sink shut-off valve and an open breaker panel nearby.
    Illustration. Follow your model’s instructions.
    Before you begin

    Shut off the water supply

    Close the shutoff valve under the sink.

  2. Dishwashers in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Check 2

    Press Cancel once

    This silences the tone. Pressing it again clears the code, per the JennAir page.

  3. The black glass control strip of a built-in wall oven above its stainless handle
    Illustration. Follow your model’s instructions.
    Check 3

    Leave the door closed and the power on

    JennAir says not to turn off power so the drain sequence can run.

  4. Over the shoulder view of a person holding a tablet with a blank checklist, a refrigerator behind.
    Illustration. Follow your model’s instructions.
    Check 4

    Review the install checks

    Is it a new installation? Is the water supply connected correctly? Is the float switch connected? Does the drip tray need emptying? Could there be suds?

Still showing F8E4?

Send the model and the checks you have already run, then begin your request from this page.

Book a visit

The water-in path.

Conceptual dishwasher sectionSupply valveInlet connectionDishwasher123
  1. 1Supply valve
  2. 3Dishwasher

A simplified drawing, because layouts change with the model. Tap an outlined part to see a photo and the related check.

Parts behind the message.

Plastic drip tray with a small float switch and red and black wire, pulled partway out from under a dishwasher.

Component reference

Float switch and drip tray

The float switch watches for too much water.

Read the definition

A little more context.

What does F8E4 mean?

JennAir's Dishwasher Error Codes - Reading page words it as Water Detected in Drip Tray.

Read the supporting manual

What do I do right away?

Turn off the water, press Cancel once, keep the door closed and leave the power on while the dishwasher drains.

Read the supporting manual

What are the install checks?

The F8E4 pages ask if the dishwasher is newly installed, whether the water supply and float switch are connected correctly, and whether the drip tray needs emptying or suds are present.

Read the supporting manual

The manual behind the message.

Manufacturer document

Dishwasher Error Codes - Reading - Product Help | JennAir

JennAir Product Help (producthelp.jennair.com)

dateModified 2026-08-31; PH 14220 / PH 14220 (dishwasher)

Manufacturer document

F8E4 - Dishwasher - Product Help | JennAir

JennAir Product Help (producthelp.jennair.com)

dateModified 2026-06-15; PH 12200 / PH 12200 (dishwasher)

Manufacturer document

8 Pause 4 Pause - pause, repeat - Error Code - Dishwasher - Product Help | JennAir

JennAir Product Help (producthelp.jennair.com)

dateModified 2026-06-15; PH 12179 / PH 12179 (dishwasher)

Manufacturer document

F8E4 - Error Code - Dishwasher - Product Help | JennAir

JennAir Product Help (producthelp.jennair.com)

dateModified 2026-06-17; PH 12267 / PH 12267 (dishwasher)

Manufacturer document

Dishwasher Error Codes - Reading - Product Help | JennAir

JennAir Product Help (producthelp.jennair.com)

dateModified 2026-08-31; PH 14220 / PH 14220 (dishwasher)

Scope: JennAir dishwashers. The meaning comes from the reading page (PH 14220, 2026); the older F8E4 pages (PH 12200, 12267) print the checks without naming a cause.

Here to help

Good questions.
Clear answers.

Talk to our team
What is the meaning of F8E4 on a JennAir dishwasher?

Water Detected in Drip Tray, per the JennAir reading page.

Should I turn the power off?

No. JennAir says not to, so the drain sequence can run. F8E5 is the code with an exception.

How do I clear F8E4?

Press Cancel once to silence the tone and again to clear the code.

Is 8-4 the same as F8E4?

Yes, it is the older spelling.

Is F8E4 a leak?

JennAir words it as water in the drip tray, which should be treated as one until checked.

Let’s take care of it.

Something on the display?
Send us the details.